From: Christopher M. <g8k...@op...> - 2012-12-15 16:19:43
|
On 12/14/2012 01:52 PM, Christopher Moore wrote: > On 12/14/2012 12:34 PM, Christopher Moore wrote: >> Hello everyone, >> >> I just upgraded from mythbuntu 10.04 -> 12.04 and now my remote has >> stopped working, except for the 1 aspect/zoom button ( >> 000000037ff07bd8 ). I've been searching through the web for >> solutions and so far nothing has worked. >> >> What is working is my iguanair daemon ( 1.0.3-1ubuntu1 ) started >> successfully and registered the /dev/'s properly. I can also >> communicate with it : >> >> igclient --receiver-on --sleep 30 >> ... >> received 6 signal(s): >> pulse: 298 >> space: 469 >> pulse: 341 >> space: 554 >> pulse: 768 >> space: 43690 >> received 1 signal(s): >> space: 152917 >> ... >> >> ll /dev/iguanaIR/ >> total 0 >> srwxrwxrwx 1 iguanair iguanair 0 Dec 14 10:15 0 >> srwxrwxrwx 1 iguanair iguanair 0 Dec 14 10:15 ctl >> lrwxrwxrwx 1 iguanair iguanair 1 Dec 14 10:15 fred -_ 0 >> >> I also followed the directions on their page, as I did previously, to >> compile iguanair into lirc ( 0.9.0-0ubuntu1 ) and install the .deb's >> generated from the process. >> >> ll /var/run/lirc/ >> total 8 >> srw-rw-rw- 1 root root 0 Dec 14 10:25 lircd >> srw-rw-rw- 1 root root 0 Dec 14 10:25 lircd11 >> -rw-r--r-- 1 root root 5 Dec 14 10:25 lircd1.pid >> -rw-r--r-- 1 root root 5 Dec 14 10:25 lircd.pid >> >> REMOTE ARGS = --output=/var/run/lirc/lircd --driver=iguanaIR >> --device=/dev/iguanaIR/0 --listen >> TRANSMITTER ARGS = --output=/var/run/lirc/lircd11 --driver=iguanaIR >> --device=/dev/iguanaIR/0 -H iguanaIR --connect=localhost:8765 >> --pidfile=/var/run/lirc/lircd1.pid >> >> >> irsend is also running and I can successfully send commands manually >> using a terminal to my tv. >> >> my hardware.conf remains unchanged from before : >> >> #Chosen Remote Control >> REMOTE="Iguanaworks USB IR Transceiver" >> REMOTE_MODULES="" >> REMOTE_DRIVER="iguanaIR" >> REMOTE_DEVICE="/dev/iguanaIR/0" >> REMOTE_LIRCD_CONF="myremote.conf" >> REMOTE_LIRCD_ARGS="" >> >> #Chosen IR Transmitter >> TRANSMITTER="IguanaIR" >> TRANSMITTER_MODULES="" >> TRANSMITTER_DRIVER="iguanaIR" >> TRANSMITTER_DEVICE="/dev/iguanaIR/0" >> TRANSMITTER_SOCKET="/var/run/lirc/lircd1" >> TRANSMITTER_LIRCD_CONF="toshiba.conf" >> TRANSMITTER_LIRCD_ARGS="-H iguanaIR" >> >> irw, however only seems to register 1 command ( zoom ) and no other >> keys. >> >> I confirmed vs the /usr/share/lirc/remotes that no codes changed, and >> my settings match. >> >> I've attached my configuration files. >> >> Any ideas ? I have thrown every config at this I have found for this >> remote. The ir-keymap solution also does not work, probably b/c I am >> not using a mceusb receiver. This makes no sense ... >> >> Thanks >> >> Christopher >> >> >> ------------------------------------------------------------------------------ >> LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial >> Remotely access PCs and mobile devices and provide instant support >> Improve your efficiency, and focus on delivering more value-add services >> Discover what IT Professionals Know. Rescue delivers >> http://p.sf.net/sfu/logmein_12329d2d > > I should also mention that I have tried running 'irrecord' and > 'irrecord -f' to force raw mode, and still only that 1 button gets > recognised. > > > > > ------------------------------------------------------------------------------ > LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial > Remotely access PCs and mobile devices and provide instant support > Improve your efficiency, and focus on delivering more value-add services > Discover what IT Professionals Know. Rescue delivers > http://p.sf.net/sfu/logmein_12329d2d Just for the heck of it , I tried the ir receiver that came w/ the remote , which I use on another htpc. None of the other buttons registered. I ordered a replacement remote that should come in early next week. I think I can safely rule out any software issues at this point. |