imon ffdc rc6 only recognizing some buttons

[greg <gr...@ne...>]

lirc is somewhat working but only the left/right/up/down buttons seem to
be recognized.  irw echos various control characters for those 4 buttons
and nothing else for the other buttons.  this box and remote have been
in service for a few years and previously working well prior to Maverick
and the recent driver changes so i do not think it's a hardware issue.

thanks for any advice.
Greg

here is a variety of background info on the box and config:
	- antec fusion case with the imon ffdc usb receiver.
	- phillips rc6 remote
	- ubuntu natty 32 bit.  kernel 2.6.38-8

/etc/init.d/lirc changes:
	i've commented out the stuff that "blats the protocol"

lirc related dmesg output:
        [   28.500561] lirc_dev: IR Remote Control driver registered,
        major 250 
        [   28.502351] IR LIRC bridge handler initialized
        [   28.503040] type=1400 audit(1305180272.068:8):
        apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd"
        pid=534 comm="apparmor_parser"
        [   28.517221] input: iMON Panel, Knob and Mouse(15c2:ffdc)
        as /devices/pci0000:00/0000:00:02.0/usb3/3-5/3-5:1.0/input/input3
        [   28.564951] type=1400 audit(1305180272.132:9):
        apparmor="STATUS" operation="profile_replace"
        name="/usr/sbin/ntpd" pid=576 comm="apparmor_parser"
        [   28.572614] imon 3-5:1.0: 0xffdc iMON LCD, MCE IR (id 0x9f)
        [   28.572618] imon 3-5:1.0: imon_set_display_type: overriding
        display type to 1 via modparam
        [   28.624101] Registered IR keymap rc-imon-mce
        [   28.624286] input: iMON Remote (15c2:ffdc)
        as /devices/pci0000:00/0000:00:02.0/usb3/3-5/3-5:1.0/rc/rc0/input4
        [   28.624368] rc0: iMON Remote (15c2:ffdc)
        as /devices/pci0000:00/0000:00:02.0/usb3/3-5/3-5:1.0/rc/rc0
        
lsusb output:
        Bus 003 Device 003: ID 15c2:ffdc SoundGraph Inc. iMON PAD Remote
        Controller


/etc/lirc/hardware.conf:
        REMOTE="Linux input layer (/dev/input/eventX)"
        REMOTE_MODULES=""
        REMOTE_DRIVER="devinput"
        REMOTE_DEVICE="/dev/input/by-id/usb-15c2_ffdc-event-if00"
        REMOTE_SOCKET=""
        REMOTE_LIRCD_CONF="devinput/lircd.conf.devinput"
        REMOTE_LIRCD_ARGS=""
        TRANSMITTER="None"
        TRANSMITTER_MODULES=""
        TRANSMITTER_DRIVER=""
        TRANSMITTER_DEVICE=""
        TRANSMITTER_SOCKET=""
        TRANSMITTER_LIRCD_CONF=""
        TRANSMITTER_LIRCD_ARGS=""
        START_LIRCD="true"
        START_LIRCMD=""
        LOAD_MODULES=""
        LIRCMD_CONF=""
        FORCE_NONINTERACTIVE_RECONFIGURATION="false"
        
ir-keytable output:
        Found /sys/class/rc/rc0/ (/dev/input/event4) with:
        Driver imon, table rc-imon-mce
        Supported protocols: RC-6 
        Enabled protocols: RC-6 
        Repeat delay = 500 ms, repeat period = 33 ms