From: Jarod W. <ja...@wi...> - 2010-11-23 05:59:58
|
On Nov 22, 2010, at 10:27 PM, Zooka wrote: > On 23/11/2010 11:57 AM, Zooka wrote: >> Hello, >> >> I have an Imon pad receiver (15c2:ffdc) that is setup and working fine. >> Lately some of the buttons on the remote are getting more difficult to >> press suggesting the remote is dying. >> >> I brought out my Panasonic TV remote to see if I could configure lirc it >> to use it instead, but mode2 simply returns seemingly random codes for a >> single button (over 100 different codes for button '1' found so far) >> >> My question is, is it possible to use a different remote with an Imon >> receiver? >> > > After a bit more searching it seems that this receiver uses a different > protocol that isn't compatible with other remotes. Therefore, if I was > to purchase a USB MCE receiver, would I have more luck getting the > Panasonic remote to work? Yes, just about any IR remote should work just fine with an mce transceiver. Just make sure its an actual mce transceiver, and not an "MCE Compatible" receiver or some such thing that actually does the decoding in hardware for only the mce remote (similar to how the imon receivers function). -- Jarod Wilson ja...@wi... |