Re: Topseed eHome mceusb2 device won't transmit

[Jarod W. <ja...@wi...>]

On Jun 18, 2009, at 11:45 AM, mike dehart wrote:

> On Thu, Jun 18, 2009 at 10:02 AM, Jarod Wilson <ja...@wi...>  
> wrote:
> On Jun 18, 2009, at 10:45 AM, mike dehart wrote:
>
> I'm using this on an ubuntu box (XBMC Live in fact).  The receiver  
> works flawlessly, but irsend will not transmit.  irsend is aware of  
> the device and can list its codes:
> ...
>
> but if i run any irsend command to transmit, the talkback LED  
> doesn't flash (i have confirmed the talkback does work with another  
> device) and nothing is sent.  i've even tried setting the transmitter
>
> here is the lsusb output:
>
> Bus 001 Device 003: ID 13fe:3100 Kingston Technology Company Inc.
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 002: ID 1784:0008 TopSeed Technology Corp.
>
>
> Hm... Okay, so its one of the topseed devices that was already in  
> the transmitter_mask_list[] in the driver, which denotes that we  
> think its transmitter mask is not inverted like it is on the bulk of  
> other receivers. Perhaps that's wrong for this device. I'd try  
> rebuilding lirc_mceusb2 from lirc cvs with the entry for your device  
> in the transmitter_mask_list commented out.
>
> every time i run configure i get the following message:
>
> miked@miked-ubuntu-vm:~/xbmc/lirc/lirc$ ./configure --with- 
> moduledir=/lib/modules/2.6.24-19-generic/misc --with-x --with- 
> driver=mceusb2 --with-major=61 --with-port=none -with-irq=none
> configure: error: cannot find install-sh or install.sh in "." "./.."  
> "./../.."



http://lirc.org/cvs.html

-- 
Jarod Wilson
ja...@wi...