Re: IR laptop chip

[Josu L. <jos...@gm...>]

Hello again, I think I just configured well.

I downloaded a config file and copied on /etc/lirc/.

Now, I can execute the programa and it starts without problem:
 debian:/etc/lirc# /etc/init.d/lirc start
Starting lirc daemon: lircd.

How can I probe if it is receiving something?

Thanks again, I don't know which hardware I am using.

Regards.


2009/1/15, Josu Lazkano <jos...@gm...>:
>
> Hello everyone. I am new in this mail list, this i my first post.
>
> I am having problems to configure my laptop's IR hardware. I have a HP
> Compaq nx8220 with a Debian Lenny.
>
> I just installed the lirc software by "apt-get install lirc". But I don't
> know how to configure.
>
> Whicj IR chip I have? This is my "lspci" output:
>
> lazkano@debian:~$ lspci
> 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express
> Processor to DRAM Controller (rev 03)
> 00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express
> Root Port (rev 03)
> 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
> PCI Express Port 1 (rev 03)
> 00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
> PCI Express Port 2 (rev 03)
> 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB UHCI #1 (rev 03)
> 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB UHCI #2 (rev 03)
> 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB UHCI #3 (rev 03)
> 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB2 EHCI Controller (rev 03)
> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
> 00:1e.2 Multimedia audio controller: Intel Corporation
> 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
> 00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97
> Modem Controller (rev 03)
> 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge
> (rev 03)
> 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) IDE Controller (rev 03)
> 01:00.0 VGA compatible controller: ATI Technologies Inc M24 1P [Radeon
> Mobility X600]
> 02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG
> [Calexico2] Network Connection (rev 05)
> 02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
> 02:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394
> Host Controller
> 02:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated
> FlashMedia Controller
> 02:06.4 SD Host controller: Texas Instruments
> PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
> 02:06.5 Communication controller: Texas Instruments
> PCI6411/6421/6611/6621/7411/7421/7611/7621 Smart Card Controller
> 10:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M
> Gigabit Ethernet PCI Express (rev 11)
>
> Thanks a lot.
>
>
>
> --
> Josu Lazkano
>



-- 
Josu Lazkano