lirc_i2c: Wintv-pvr-usb2, no IR reception

[Siddhartha J. <sid...@si...>]

Hi,

I am running:
Wintv-PVR-USB2 (24xx the *fourth* version with the IR blaster)
Kernel 2.6.21 on CentOS 4.4
pvrusb2 - in-tree version
lirc - 0.8.2-pre2

I do this:
#modprobe i2c-algo-bit
#modprobe lirc_i2c

#tail /var/log/messages
May 13 16:05:26 linpvr ntpd[4456]: synchronized to 192.36.143.150, stratum 1
May 13 16:05:28 linpvr kernel: lirc_dev: IR Remote Control driver
registered, at major 61
May 13 16:05:28 linpvr kernel: lirc_i2c: no version for
"lirc_unregister_plugin" found: kernel tainted.
May 13 16:05:28 linpvr kernel: bttv: driver version 0.9.17 loaded
May 13 16:05:28 linpvr kernel: bttv: using 8 buffers with 2080k (520
pages) each for capture
May 13 16:05:28 linpvr kernel: cx2388x v4l2 driver version 0.0.6 loaded
May 13 16:05:28 linpvr kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR)
May 13 16:05:28 linpvr kernel: lirc_dev: lirc_register_plugin: sample_rate: 10
May 13 16:05:28 linpvr kernel: lirc_i2c: chip found @ 0x71 (Hauppauge
IR (PVR150))
May 13 16:05:28 linpvr kernel: lirc_dev: lirc_register_plugin: sample_rate: 10

#/usr/local/lirc/sbin/lircd -d /dev/lirc1 (lirc0 is fake apparently
though I've tried it too)

#tail /var/log/lircd
May 13 16:06:04 linpvr lircd: lircd(hauppauge) ready
May 13 16:06:25 linpvr lircd: accepted new client on /dev/lircd

#/usr/local/lirc/bin/irw

Then press keys on the remote pointing it towards the PVR device but I
get nothing!!

Any help or clues to debug the issue?

Thanks,

- Siddhartha