From: Jake B. <ja...@co...> - 2007-05-06 22:34:02
|
Right, I feel like a right plonker. New batteries == working remote. Not saying that David Frascone doesn't have a problem, but this solved mine! I suppose that the batteries in remote last so so long, that I almost forget they are there :) I would not have thought to change them, if it were not for the fact I have a little red LED that lights up upon button press on my remote, and it was not lighting up on each button press. Sorry for wasting time! Jake Jake Briggs wrote: > Christoph Bartelmus wrote: > >> Here: http://www.lirc.org/html/technical.html#bugs >> If this is not the reason, then post your config file and mode2 data for >> both working and not working cases. >> >> Christoph >> >> > > > I am not sending IR either, and hdparm tells me that the using_dma and > unmaskirq options are set on both my hdd and cdrom :( > > captainspaulding ~ # hdparm /dev/hda > > /dev/hda: > multcount = 16 (on) > IO_support = 1 (32-bit) > unmaskirq = 1 (on) > using_dma = 1 (on) > keepsettings = 0 (off) > readonly = 0 (off) > readahead = 256 (on) > geometry = 16383/255/63, sectors = 78165360, start = 0 > captainspaulding ~ # hdparm /dev/hdc > > /dev/hdc: > IO_support = 1 (32-bit) > unmaskirq = 1 (on) > using_dma = 1 (on) > keepsettings = 0 (off) > readonly = 0 (off) > readahead = 256 (on) > HDIO_GETGEO failed: Inappropriate ioctl for device > captainspaulding ~ # > > > lirc seems to go fine after a reboot, but after a day or two I notice > that I am missing button presses :( I'll try to send the mode2 data as > well :) > > Jake > > > > -- Jacob Briggs Systems Engineer Core Technology Limited Level 1, NZX Centre 11 Cable Street Wellington Phone +64 4 801 2252 -- object doAnythingConceivable(string whatToDo, object whatToDoItWith) { ..... |