From: Steve C. <st...@sa...> - 2006-05-11 04:12:08
|
** Reply to message from Cecil Watson <cw...@li...> on Wed, 10 May 2006 11:05:31 -0700 > Steve Corwin wrote: > >>I trying to set up KnoppMyth on a Dell Dimension 4400. I burnt > >>KnoppMyth to a CD, booted it and during setup, it asks me if I had IR > >>Blaster. I ordered it, received it and plugged it in. Setup asked me > >>what kind of remote I had. I saw on the list that the RCA 6-in-1 was > >>there. I went out, got it and answered "rca-6n1" to the KnoppMyth > >>remote question. I thought that because the remote was on the list of > >>approved remotes and that IR Blaster was supported by lirc and MythTV, > >>that the remote would work "out of the box". I was wrong. What do I > >>need to do next to get the remote working? > > > > > > I would start with some lower-level testing: > > > > 1. Exit mythtv and run irw at a command prompt. > > 2. Point your remote at the IR receiver and push some buttons. > > 3. irw should begin printing messages that contain the names of the > > buttons you pushed (along with some other stuff). > > 4. If irw just sits there, there is most likely a problem with the > > file /etc/lircd.conf or possibly a hardware problem. > > 5. If irw prints messages, test all the buttons on your remote. If > > they're working the problem is probably with > > /home/mythtv/mythtv/lircrc. > > 6. Be patient - this may not be easy. > > > > -Steve > > > Great tips Steve! You forgot #7. > 7. Let the KnoppMyth developers (me) know how you resolved this so the > fix can be rolled into future versions. > > Regards, > > Cecil That would be because I had no idea there was anybody so knowledgeable here. :-) Oh, and thanks for developing KnoppMyth! -Steve |