lirc-0.80pre3 on 2.6.14: streamzap troubles

[Peter M. <Pe...@ze...>]

I have been started working with embedded linux over the last year, and =
I ran across LIRC.  Very useful indeed!  I hope I can thank you for all, =
by hopefully being able to contribute to the developement effort in the =
near future.
---------

I have built LIRC for an Atmel AT91RM9200 target (ARM4L platform), for =
the Streamzap IR remote and USB receiver.  Upon testing, irw produces no =
output, while irrecord reports "Something went wrong" at every remote =
button press.

Set "debug=3D1" and recompiled the drivers (lirc_dev and =
lirc_streamzap).  Here are some (relevant) kmsg lines, just after linux =
boot:
http://www3.telus.net/pvdrem/mp1/kmsg_lirc.txt
Looks like the drivers install okay.

Here is the kmsg dump when I run irw, and press the remote's POWER =
button:
http://www3.telus.net/pvdrem/mp1/dbg_driver_POWER.txt

Re-compiled lircd with DEBUG flag set (drivers reverted).  Here is the =
/var/log/lircd output while running irw and pressing the remote's POWER =
button for about 1 second:
http://www3.telus.net/pvdrem/mp1/log_lircd_irw_POWER.txt

Any idea what could be going wrong?
Interesting to note the pulse/space=3D128 the driver keeps reporting, =
yet the /etc/lircd.conf has pulse/space=3D889.  Yes, I did try changing =
lircd.conf to have pulse/space=3D128, but it seems to produce little =
difference.  Perhaps I am misinterpreting what value "889" really is?

Any assistance would be greatly appreciated.

Thanks & Regards,
Pete