FlyDVB-T Duo , newbie problems.

[Garry K. <fea...@do...>]

My objective is to eventually make a lircd.conf and submit it, or confirm that the generic flyvideo one works with my hardware. But before I can do that, I need lirc to be working. At first I could not even get   lirc-0.7.2pre3 to make, let alone install. I eventually figured out that I needed 'unload modules' installed in my 2.6.13.4 kernel, I configured this and made the kernel and installed the new kernel modules and system.map. After that all seemed to go well. .configure I chose the closest 'card' to mine, flyvideo card=56 , saa7134 says my card is 55. make && make install ran fine.

But when it came to modprobe lirc_gpio I got the following error originally, (or was it when I was installing modules on the kernel when I included module support for other hardware after)
lirc_dev: Unknown symbol class_simple_device_add
lirc_dev: Unknown symbol class_simple_destroy
lirc_dev: Unknown symbol class_simple_device_remove
lirc_dev: Unknown symbol class_simple_create
lirc_dev: Unknown symbol class_simple_device_add
lirc_dev: Unknown symbol class_simple_destroy
lirc_dev: Unknown symbol class_simple_device_remove
lirc_dev: Unknown symbol class_simple_create

I tried many different things the last week or so, and to be honest, I've lost complete track of what or how I ended up with my latest problem. At the moment when I modprobe lirc_gpio I get:-
FATAL: Error inserting lirc_gpio (/lib/modules/2.6.13.4/misc/lirc_gpio.ko): Invalid request code

In dmesg I get:-
lirc_dev: IR Remote Control driver registered, at major 61 
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
The bttv_* interface is obsolete and will go away,
please use the new, sysfs based interface instead.
lirc_gpio (-1): could not get card type
The bttv_* interface is obsolete and will go away,
please use the new, sysfs based interface instead.
lirc_gpio (-1): could not get card type

I've back-read the mailing lists for months and have only found one reference to this, and there was nothing there that could help me. I hope someone can spare the time to help a newbie get lirc working:)

Gazza.