From: Pedro P. M. <ped...@ca...> - 2005-08-28 15:18:14
|
[To ML admin, I had sent this email via an alias that's not registered for this list so it hasn't yet passed moderation, please delete it from the moderation queue, thank you.] Hi there, I have a Mitsumi MCE 2005 remote control, is it supported via mceusb or mceusb2 with a simple hack, i.e., by adding the correct identifier? At this moment, I'm trying to compile the mceusb module in the most recent linux kernel for this distro; it doesn't build...; next I'll be trying the mceusb2 driver, which isn't in the default kernel source tree. I'll hack as far as my knowledge on kernel drivers goes (not an expert, but capable of understanding with 3-4 more hours studying the source). In the meantime, if anyone has information concerning success with this trasciever, please let me know. After I've done testing (it'll have to wait until Monday), I'll let you know of my results. I'm working for a Portuguese linux distro (Caixa Magica) to get this remote working on a media "cube" pc. I'll get deep into the driver internals and contribute code if necessary. Just lend me some pointers to start on development if it's really necessary. Here's the result for "lspci -vv": Bus 002 Device 003: ID 03ee:2501 Mitsumi Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 16 idVendor 0x03ee Mitsumi idProduct 0x2501 bcdDevice 0.00 iManufacturer 1 iProduct 2 iSerial 3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0010 bytes 16 once bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0010 bytes 16 once bInterval 0 The back of the transciever says: Model RFO-HF-MS Thanks and have a nice weekend, Pedro Palhoto Matos |