mythtv & lircsetup.com

[m d <dr...@ya...>]

I've followed the Wilson Guide and the lircsetup.com
guide.  All packages are the most current from ATRPMs
stable  I'm using one instance of LIRC to control two
devices (PVR 250 IR receiver and serial IR blaster)

Once booted, IRW doesn't work, and the IR blaster
won't work in the Mythfrontend.  I have to run these
commands to get everything running;

/sbin/rmmod lirc_i2c
/wbin/rmmod lirc_serial
/sbin/service lircd stop
/sbin/service lircd stop
/sbin/depmod -a
/sbin/modprobe lirc_i2c
/sbin/modprobe lirc_serial
/usr/sbin/lircd --device=/dev/lirc0
--output=/dev/lircd
/usr/sbin/lircd --driver=default --device=/dev/lirc1
--output=/dev/lircd1 --pidfile=/var/run/lircd1.pid

*Note* service lircd stop needs to be executed twice
as there are two PIDs that need to be stopped.

1) Does anyone know why this is happening? 
2) Where could I put the above commancds so that I
don't need to manually enter the commands on every
reboot.

Thanks,

Marc

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com