From: Adrian S. <sa...@rp...> - 2004-07-06 19:11:56
|
Hi I have no idea where to look further... i have quite old TV Card (MachTV with bt878) with IR. Since it's not on the list of card supported by lirc i'v tried every driver from CVS version. The best thing was with lirc_gpio started like: modprobe lirc_gpio debug=1 card=0 gpio_mask=0x00003e00 gpio_lock_mask=0x0010000 gpio_xor_mask=0x0 soft_gap=400 sample_rate=5 starting modprobe lirc_gpio (without options) gives infos uabout unknown card type 0x60 id 0x0 Ok, but when started with all that options (like above) reading lircd socket (irw) in syslog i get Jul 6 21:09:24 sauron kernel: lirc_gpio (0): gpio_val is 3fdafc Jul 6 21:09:24 sauron kernel: lirc_gpio (0): gpio_val is 3fdafc Jul 6 21:09:24 sauron kernel: lirc_gpio (0): gpio_val is 3fdafc Jul 6 21:09:24 sauron kernel: lirc_gpio (0): gpio_val is 3fdafc Jul 6 21:09:24 sauron kernel: lirc_gpio (0): gpio_val is 3fdafc Jul 6 21:09:25 sauron kernel: lirc_gpio (0): gpio_val is 3fdafc Jul 6 21:09:25 sauron kernel: lirc_gpio (0): gpio_val is 3fdafc Jul 6 21:09:25 sauron kernel: lirc_gpio (0): gpio_val is 3fc4fc Jul 6 21:09:25 sauron kernel: lirc_gpio (0): gpio_val is 3fc4fc This mean that somehow it works (pressing buttons changing values of gpio_val) - but when i try to set mas, gpio_lock_mas, or gpio_xor_mask it change nothig (in logs are still the same values). Where i should look for more info about tuning lirc_gpio, or what i'm doing wrong - any help would be great! Pozdrawiam -- Adrian (Sauron) Siemieniak /,/ .. Who can destroy The Thing, sauron{at}rpg{dot}pl /`/ controls The Thing ... (DUNE) |