From: greg <gr...@do...> - 2004-01-27 14:49:53
|
Sorry, it was the 20040124 patch from FlameEye's site greg ---------- Original Message ----------- From: Paul Miller <pmi...@us...> To: "greg" <gr...@do...>, Flameeyes <dg...@us...>, CrazyBoy <cra...@fa...> Cc: lir...@li..., lir...@li... Sent: Tue, 27 Jan 2004 08:47:07 -0600 Subject: Re: atiusb driver kernel 2.6.x attached > Is this the cvs version or the one I sent to the list and Flameeyes? > I'll look at it again later tonight. > > Thanks, > -Paul > > On Tuesday 27 January 2004 3:57 am, greg wrote: > > Hi all, > > > > atiusb kernel module compiles fine on my 2.6.1 kernel source, but > > dmesg prints this: > > > > hub 1-0:1.0: new USB device on port 2, assigned address 2 > > [...] > > lirc_dev: IR Remote Control driver registered, at major 61 > > > > lirc_atiusb: USB remote driver for LIRC v0.3 > > lirc_atiusb: Paul Miller <pmi...@us...> > > Unable to handle kernel NULL pointer dereference at virtual address > > 00000246 printing eip: > > d09565a6 > > *pde = 00000000 > > Oops: 0000 [#1] > > CPU: 0 > > EIP: 0060:[<d09565a6>] Not tainted > > EFLAGS: 00010286 > > EIP is at usb_remote_probe+0x56/0x6b0 [lirc_atiusb] > > eax: 00000246 ebx: d0957dc0 ecx: 00000000 edx: cfa99e4d > > esi: ffffffed edi: c1328394 ebp: cfa99f18 esp: cfa99dcc > > ds: 007b es: 007b ss: 0068 > > Process modprobe (pid: 52, threadinfo=cfa98000 task=cfa9b900) > > Stack: cf79a2c0 cfa99e90 c01311c2 00000000 00000014 00000246 > > 0000500d 00000000 00000000 c013bc6f c02d3cff 00000246 000000a0 > > c00bee00 c00bed60 d0954900 cfa99e38 d095726c d0957e80 d0954900 > > fffffff4 cfe1d480 c13f8b00 cfa99e88 Call Trace: > > [<c01311c2>] obsolete_params+0x102/0x130 > > [<c013bc6f>] kmem_cache_alloc+0x5f/0x70 > > [<c0166359>] d_alloc+0x19/0x1f0 > > [<c013bc6f>] kmem_cache_alloc+0x5f/0x70 > > [<c0180d93>] create_dir+0x83/0xa0 > > [<c0180e01>] sysfs_create_dir+0x31/0x70 > > [<c024df10>] usb_probe_interface+0x50/0x60 > > [<c021007f>] bus_match+0x2f/0x60 > > [<c021017d>] driver_attach+0x4d/0x80 > > [<c021040d>] bus_add_driver+0x7d/0x90 > > [<c024dfd4>] usb_register+0x44/0x90 > > [<d0912037>] usb_remote_init+0x37/0x60 [lirc_atiusb] > > [<c013279c>] sys_init_module+0x11c/0x280 > > [<c010a28f>] syscall_call+0x7/0xb > > > > Code: 8b 00 85 c9 89 85 cc fe ff ff 74 0d 50 68 40 70 95 d0 e8 03 > > > > My usb_uhci driver is compiled built-in. The HF receiver is > > plugged-in. > > > > greg > > > > ---------- Original Message ----------- > > From: Flameeyes <dg...@us...> > > To: Paul Miller <pmi...@us...> > > Cc: lir...@li... > > Sent: Sat, 24 Jan 2004 15:53:39 +0100 > > Subject: Re: atiusb driver kernel 2.6.x attached > > > > > On Saturday 24 January 2004 15:17, Paul Miller wrote: > > > > Flameyes, please include this driver with your 2.6 patches. It > > > > correctly compiles and loads now. > > > > > > Updated, I've released a new version of the patch, including your > > > new driver. > > > > > > As usual can be downloaded from > > > http://flameeyes.web.ctonet.it/ > > > > > > -- > > > Flameeyes <dg...@us...> > > > You can find LIRC for 2.6 kernels at > > > http://flameeyes.web.ctonet.it/ > > > > > > ------------------------------------------------------- > > > The SF.Net email is sponsored by EclipseCon 2004 > > > Premiere Conference on Open Tools Development and Integration > > > See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. > > > http://www.eclipsecon.org/osdn > > > > ------- End of Original Message ------- ------- End of Original Message ------- |