[Linuxwacom-discuss] Debian Sid, Kernel 2.6.10

[Olivier L. <ol...@ol...>]

I managed to make the Wacom tablet work perfectly on my installation.
Then, for another reason I had to reboot, and it no longer works at all.

I tried again the method suggested by Ron, with the wacom-kernel-source
package, with no visible success.

I then tried the "success method" for Debian Sid, as described on the
LinuxWacom HOWTO, with no success either. Note that when configuring
linuxwacom-0.6.3, I do not enable usbmouse, as suggested in the HOWTO,
and do not enable mousedev either, since it cannot be installed as a
module in kernel 2.6.10.

Here follows a description of what occurs:

When I reboot with the tablet already plugged in, my USB mouse is no
longer working. If I unplug the tablet, I have no mouse at all. If I
restart the X server in this situation, it fails to start after several
attempts.

Then I reboot with the tablet unplugged, and I plug it in after. Here
follow the relevant parts of /var/log/messages:

May 30 11:04:28 pierredelune kernel: usbcore: registered new driver
wacom
May 30 11:04:28 pierredelune kernel: drivers/usb/input/wacom.c:
v1.30:USB Wacom Graphire and Wacom Intuos tablet driver
May 30 11:04:28 pierredelune kernel: drivers/usb/input/hid-input.c:
event field not found
May 30 11:04:28 pierredelune kernel: drivers/usb/input/hid-input.c:
event field not found

----- later I plug in the tablet:

 May 30 11:08:20 pierredelune kernel: usb 1-1.3: new full speed USB
 device using ehci_hcd and address 5
May 30 11:08:30 pierredelune kernel: drivers/usb/input/hid-core.c:
 timeout initializing reports
May 30 11:08:30 pierredelune kernel: 
May 30 11:08:30 pierredelune kernel: input,hiddev96: USB HID v1.00 Mouse
 [Tablet PTZ-630] on usb-0000:00:1d.7-1.3
May 30 11:08:31 pierredelune kernel: usb 1-1.3: USB disconnect, address
 5
May 30 11:08:31 pierredelune kernel: usb 1-1.3: new full speed USB
 device using ehci_hcd and address 6
May 30 11:08:41 pierredelune kernel: drivers/usb/input/hid-core.c:
 timeout initializing reports
May 30 11:08:41 pierredelune kernel: 
May 30 11:08:41 pierredelune kernel: input,hiddev96: USB HID v1.00 Mouse
 [Tablet PTZ-630] on usb-0000:00:1d.7-1.3
May 30 11:08:42 pierredelune kernel: usb 1-1.3: USB disconnect, address
 6
May 30 11:08:42 pierredelune kernel: usb 1-1.3: new full speed USB
 device using ehci_hcd and address 7
May 30 11:08:52 pierredelune kernel: drivers/usb/input/hid-core.c:
 timeout initializing reports
May 30 11:08:52 pierredelune kernel: 
May 30 11:08:52 pierredelune kernel: input,hiddev96: USB HID v1.00 Mouse
 [Tablet PTZ-630] on usb-0000:00:1d.7-1.3
May 30 11:08:53 pierredelune kernel: usb 1-1.3: USB disconnect, address
 7
May 30 11:08:53 pierredelune kernel: usb 1-1.3: new full speed USB
 device using ehci_hcd and address 8
May 30 11:08:56 pierredelune kernel: input,hiddev96: USB HID v1.00 Mouse
 [Tablet PTZ-630] on usb-0000:00:1d.7-1.3
May 30 11:08:56 pierredelune kernel: usb 1-1.3: USB disconnect, address
 8

After that I disconnect the tablet, and send this message.

Where are my mistakes?

-- 


			Olivier Lecarme