[Linuxwacom-discuss] xidump dumps nothing [fedora core 1 CCRMA]

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

Hello. I've been very impressed by the linux-wacom driver on a=20
collegue's desktop,
and wanted to install it on my linux box (i've only been using my wacom=20
tablet under
win32till now). The tablet is a Wacom Intuos 2. I've been through the=20
process of installing
the drivers at least 10 times since yesterday, trying all options=20
(including rebuilding
 wacom_drv.o From Scratch) but none solved my main problem : i can't get=20
the event0
 (it's event0, works with xxd and wacdump) to pipe its info through=20
XFree : the xidump
 utility is silent. I had some issues with tcl/tk at first, but that was=20
due to symlinking mistakes,
 and wacomcpl loads fine.
I shall include here all the messages i received from the installation=20
process, step by
step, and hope you forgive by advance the long post. I've been trying to=20
get it working
 as much as i could, without calling for help, but i'm really stuck now..=
.
So thanks in advance for any answers you could give me !

_________________________________________
1) CONFIGURING AND BUILDING
_________________________________________
I'm running the Planet CCRAM distrib of linux (fedora core with low=20
lattency kernel)

>  uname -r 2.4.26-1.ll.rhfc1.ccrmasmp

The only mouse i use is an usb mouse with an USB-to-PS2 adapter on the=20
standard PS2 port, so
i guess its signal isn't handled by USB.

First (as a reference) when i plug the wacon tablet with the default=20
wacom driver in fedora,i get that output :

----------------------------------------
>  tail -f /var/log/messages
> > Jun 27 21:31:15 localhost kernel: hub.c: new USB device 00:1d.2-2,
> > assigned address 3 Jun 27 21:31:15 localhost kernel: input0: Wacom
> > Intuos2 12x12 on usb3:3.0 Jun 27 21:31:18 localhost
> > usb.agent[6970]: missing kernel or user mode driver wacom Jun 27
> > 21:31:18 localhost usb.agent[6970]: missing kernel or user mode
> > driver hid Jun 27 21:31:18 localhost usb.agent[6970]: missing
> > kernel or user mode driver mousedev Jun 27 21:31:19 localhost
> > devlabel: devlabel service started/restarted
----------------------------------------

The 'missing kernel or user mode driver' message concern me though i=20
didn't find for sure
what their cause is.

So i start by unpacking the last stable package downloaded on the site :=20
linuxwacom-0.6.3.tar.bz2
I decompress it in my /opt directory. The configure options are (i chose=20
to rebuild the hid, mousedev,
evdev & input drivers, as for usbmouse, i hadn't any in my distro)

./configure --enable-hid --enable-usbmouse --enable-mousedev=20
--enable-evdev --enable-input --enable-wacom =20
--with-kernel=3D/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma/

everything goes ok, and i get :

> > ---------------------------------------
 >> BUILD ENVIRONMENT:
> > architecture - i686 linux kernel - yes 2.4.22 module versioning -
> > yes -DCONFIG_MODVERSIONS -DMODVERSIONS -include
> > /usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//include/linux/modversions.h
> > kernel source - yes /usr/src/linux-2.4.26-1.ll.rhfc1.ccrma/
> > XFree86 - no XLib - yes /usr/X11R6 TCL - yes /usr TK - yes /usr
> > XFree86v3 - no ncurses - yes GTK - 2.2.4
> >
> > BUILD OPTIONS: wacom.o - yes wacdump - yes xidump - yes libwacomcfg
> > - yes libwacomxi - yes xsetwacom - yes hid.o - yes (value_patch)
> > usbmouse.o - yes evdev.o - yes mousedev.o - yes input.o - yes
> > tabletdev.o - no wacom_drv.o - no wacom_drv-v3.o - no
> > ----------------------------------------

(So it seems that the 2.4.26-1.ll.rhfc1.ccrmasmp kernel is just a=20
2.4.22, with some modules tweaked ?)
Next : make, make install
No apparent problem (as i - poorly - understand it)

NB : the ./configure, ./make, ./make install output are included at the e=
nd
of this message
_________________________________________
2) TESTING wacom.o
_________________________________________

>  rmmod wacom insmod /opt/linuxwacom-0.6.3/src/2.4.22/wacom.o

get me the following messages :

> > Jun 27 22:01:00 localhost kernel: usb.c: deregistering driver wacom
> > Jun 27 22:02:18 localhost kernel: usb.c: registered new driver
> > wacom Jun 27 22:02:18 localhost kernel: wacom.c: v1.30-j0.6.2
> > Vojtech Pavlik <vo...@su...> Jun 27 22:02:18 localhost kernel:
> > wacom.c: USB Wacom Graphire and Wacom Intuos tablet driver
> > (LINUXWACOM-DEBUG) Jun 27 22:02:18 localhost kernel: wacom_events

Here comes the first weid thing : the doc says that "A version number=20
like "1.30" is an original kernel version and not from the linuxwacom=20
package" ; but the "-j0.6.x" suffix, plus the "LINUXWACOMDEBUG" are=20
here, though it's "-j0.6.2" instead of
"-j0.6.3". As i've taken care to specify the whole path to wacom.o when=20
loading the module, i keep going on.

_________________________________________
3) COPYING new modules
_________________________________________
after backup, i issue :

>  cd /opt/linuxwacom-0.6.3/src/2.4.22/ cp wacom.o
>  /lib/modules/2.4.26-1.ll.rhfc1.ccrmasmp/kernel/drivers/usb/wacom.o cp
>  hid.o
>  /lib/modules/2.4.26-1.ll.rhfc1.ccrmasmp/kernel/drivers/usb/hid.o cp
>  usbmouse.o
>  /lib/modules/2.4.26-1.ll.rhfc1.ccrmasmp/kernel/drivers/usb/ cp
>  evdev.o
>  /lib/modules/2.4.26-1.ll.rhfc1.ccrmasmp/kernel/drivers/input/evdev.o
>  cp mousedev.o
>  /lib/modules/2.4.26-1.ll.rhfc1.ccrmasmp/kernel/drivers/input/mousedev.=
o
>  cp input.o
>  /lib/modules/2.4.26-1.ll.rhfc1.ccrmasmp/kernel/drivers/input/input.o
>  depmod -e

then reboot

_________________________________________
4) LOADING the wacom driver
_________________________________________

>  modprobe usb-uhci modprobe input modprobe mousedev modprobe wacom
>  modprobe evdev

gives :

> > Jun 27 22:36:20 localhost kernel: usb.c: registered new driver
> > wacom Jun 27 22:36:20 localhost kernel: wacom.c: v1.30-j0.6.2
> > Vojtech Pavlik <vo...@su...> Jun 27 22:36:20 localhost kernel:
> > wacom.c: USB Wacom Graphire and Wacom Intuos tablet driver
> > (LINUXWACOM-DEBUG) Jun 27 22:36:20 localhost kernel: wacom_events

again, that's "1.30-j0.6.2" and not "1.40-j0.6.3"

_________________________________________
5) PLUGGING the tablet
_________________________________________

gives :

> > Jun 27 22:42:57 localhost kernel: hub.c: new USB device 00:1d.2-2,
> > assigned address 2 Jun 27 22:42:57 localhost kernel: Reporting max
> > 30480, 31680 Jun 27 22:42:57 localhost kernel: mousedev.c: Ignoring
> > wacom tablet Jun 27 22:42:57 localhost kernel: wacom.c: Setting
> > tablet report for tablet data Jun 27 22:42:57 localhost kernel:
> > input0: Wacom Intuos2 12x12 on usb3:2.0 Jun 27 22:43:00 localhost
> > usb.agent[5811]: missing kernel or user mode driver wacom Jun 27
> > 22:43:00 localhost kernel: usb.c: registered new driver usbmouse
> > Jun 27 22:43:00 localhost kernel: usbmouse.c: v1.6:USB HID Boot
> > Protocol mouse driver Jun 27 22:43:00 localhost usb.agent[5811]:
> > missing kernel or user mode driver hid Jun 27 22:43:00 localhost
> > usb.agent[5811]: missing kernel or user mode driver mousedev Jun 27
> > 22:43:01 localhost devlabel: devlabel service started/restarted

Still the usb.agent[5811] messages...

XXD on event0 shows its input well when swapping between 4Dmouse, pencil=20
and eraser

> > Jun 27 23:16:28 localhost kernel: wacom_intuos_irq: received
> > unknown report #1 Jun 27 23:16:28 localhost kernel: wacom.c:
> > Setting tablet report for tablet data Jun 27 23:16:28 localhost
> > kernel: wacom_intuos_irq: tool change 0x852 Jun 27 23:16:52
> > localhost kernel: wacom_intuos_irq: tool change 0x094 Jun 27
> > 23:16:54 localhost kernel: wacom_intuos_irq: tool change 0x094 Jun
> > 27 23:17:00 localhost kernel: wacom_intuos_irq: tool change 0x85A

WACDUMP does well too (all buttons, pressure, tilt,... seem to work)

## wacdump v0.5.2
##
## MODEL=3DWacom Intuos2 12x12               ROM=3D1.1-5
## CLS=3DUSB  VNDR=3DWacom  DEV=3DIntuos2  SUB=3DXD-1212-U
##
## 37 3A DF 40 D3 76 04 00 04 00 00 00 8E 0D A0 01            =20
7:.@.v..........
##
##
## TOOLTYPE=3DPEN                              SERIAL=3D0x01A00D8E
##  IN_PROX=3D+00001 (+00000 .. +00000)        BUTTON=3D+00000 (+00000 ..=
=20
+00000)
##    POS_X=3D+03491 (+00000 .. +30480)         POS_Y=3D+29481 (+00000 ..=
=20
+31680)
##    ROT_Z=3D+00000 (-00900 .. +00899)      DISTANCE=3D+00120 (+00000 ..=
=20
+00015)
## PRESSURE=3D+00002 (+00000 .. +01023)        TILT_X=3D+00031 (+00000 ..=
=20
+00127)
##   TILT_Y=3D+00094 (+00000 .. +00127)      ABSWHEEL=3D+00000 (+00000 ..=
=20
+01023)
## RELWHEEL=3D+00000 (-00001 .. +00001)      THROTTLE=3D+00000 (-01023 ..=
=20
+01023)
##
##     LEFT=3D             MIDDLE=3D              RIGHT=3D              E=
XTRA=3D
##     SIDE=3D              TOUCH=3D             STYLUS=3D            STY=
LUS2=3D
##
##
## TOOLTYPE=3DERASER                           SERIAL=3D0x01A00D8E
##  IN_PROX=3D+00001 (+00000 .. +00000)        BUTTON=3D+00000 (+00000 ..=
=20
+00000)
##    POS_X=3D+03057 (+00000 .. +30480)         POS_Y=3D+30405 (+00000 ..=
=20
+31680)
##    ROT_Z=3D+00000 (-00900 .. +00899)      DISTANCE=3D+00136 (+00000 ..=
=20
+00015)
## PRESSURE=3D+00000 (+00000 .. +01023)        TILT_X=3D+00035 (+00000 ..=
=20
+00127)
##   TILT_Y=3D+00074 (+00000 .. +00127)      ABSWHEEL=3D+00000 (+00000 ..=
=20
+01023)
## RELWHEEL=3D+00000 (-00001 .. +00001)      THROTTLE=3D+00000 (-01023 ..=
=20
+01023)
##
##     LEFT=3D             MIDDLE=3D              RIGHT=3D              E=
XTRA=3D
##     SIDE=3D              TOUCH=3D             STYLUS=3D            STY=
LUS2=3D
##
##
## TOOLTYPE=3DMOUSE                            SERIAL=3D0x01B005F5
##  IN_PROX=3D+00001 (+00000 .. +00000)        BUTTON=3D+00000 (+00000 ..=
=20
+00000)
##    POS_X=3D+03016 (+00000 .. +30480)         POS_Y=3D+29096 (+00000 ..=
=20
+31680)
##    ROT_Z=3D+00315 (-00900 .. +00899)      DISTANCE=3D+00120 (+00000 ..=
=20
+00015)
## PRESSURE=3D+00000 (+00000 .. +01023)        TILT_X=3D+00000 (+00000 ..=
=20
+00127)
##   TILT_Y=3D+00000 (+00000 .. +00127)      ABSWHEEL=3D+00000 (+00000 ..=
=20
+01023)
## RELWHEEL=3D+00000 (-00001 .. +00001)      THROTTLE=3D+00000 (-01023 ..=
=20
+01023)
##
##     LEFT=3D             MIDDLE=3D              RIGHT=3D              E=
XTRA=3D
##     SIDE=3D              TOUCH=3D             STYLUS=3D            STY=
LUS2=3D
##

_________________________________________
6) CONFIGURING XFREE
_________________________________________

Adding the InputDevices, then the ServerLayout.

>  XFree86 -version
> > XFree86 Version 4.3.0 (Fedora Core 1: 4.3.0-55)

and hence :
>  cp /opt/linuxwacom-0.6.3/prebuilt/wacom_drv.o_4.3k2.4
>  /usr/X11R6/lib/modules/input/wacom_drv.o

NB : going through the same whole procedure with rebuilding wacom_drv.o=20
from XFree86 sources, and configuring
with the --with-xf86 option, led me to the same problem as described belo=
w.

Then restart X

>  grep -i wacom /var/log/XFree86.0.log
> > (II) LoadModule: "wacom" (II) Loading
> > /usr/X11R6/lib/modules/input/wacom_drv.o (II) Module wacom:
> > vendor=3D"The XFree86 Project" (II) Wacom driver level: 26-j0.6.2 $
> > (**) WACOM: suppress value is 2 (**) WACOM: suppress value is 2
> > (**) WACOM: suppress value is 2 (II) XINPUT: Adding extended input
> > device "eraser" (type: Wacom Eraser) (II) XINPUT: Adding extended
> > input device "stylus" (type: Wacom Stylus) (II) XINPUT: Adding
> > extended input device "cursor" (type: Wacom Cursor) (=3D=3D) Wacom
> > Kernel Input driver version is 1.0.0 (=3D=3D) Wacom using pressure
> > threshold of 61 for button 1 (=3D=3D) Wacom USB Intuos2 tablet
> > speed=3D9600 maxX=3D30480 maxY=3D31680 maxZ=3D1023 resX=3D2540 resY=3D=
2540
> > suppress=3D2 tilt=3Ddisabled (=3D=3D) Wacom device "cursor" top X=3D0=
 top Y=3D0
> > bottom X=3D30480 bottom Y=3D31680 (=3D=3D) Wacom device "stylus" top =
X=3D0
> > top Y=3D0 bottom X=3D30480 bottom Y=3D31680 (=3D=3D) Wacom device "er=
aser"
> > top X=3D0 top Y=3D0 bottom X=3D30480 bottom Y=3D31680

xsetpointer does :

>  xsetpointer -l
> > "eraser" [XExtensionDevice] "stylus"
> > [XExtensionDevice] "cursor" [XExtensionDevice]
> > "DevInputMice" [XExtensionDevice] "Mouse0" [XPointer]
> > "NVIDIA Event Handler" [XExtensionDevice] "keyboard"
> > [XKeyboard]

xidump -l does :

>  xidump -l
> > eraser extension stylus
> > extension cursor extension DevInputMice
> > extension Mouse0 disabled NVIDIA Event
> > Handler extension keyboard keyboard
> >

>  xidump -l -v eraser
> > eraser extension key: min=3D8, max=3D39, num=3D32
> > btn: num=3D1 val: axes=3D6 mode=3Dabs buf=3D0 axis[0]: res=3D99999, m=
ax=3D0,
> > max=3D30480 axis[1]: res=3D1, max=3D0, max=3D31680 axis[2]: res=3D1, =
max=3D0,
> > max=3D1023 axis[3]: res=3D1, max=3D-64, max=3D63 axis[4]: res=3D1, ma=
x=3D-64,
> > max=3D63 axis[5]: res=3D1, max=3D0, max=3D1023

>  xidump -u raw stylus

NO OUTPUT

though in /var/log/messages, the tool change is noted :
> > Jun 27 23:59:29 localhost kernel: wacom_intuos_irq: tool change
> > 0x852

And i never could get xidump to read anything. So the X server doesn't=20
seem to communicate
through wacom_drv.o, which might be responsible, i really don't know.

Any suggestion ?

_________________________________________
       ANNEXES : configure & make output (STEP 1)
_________________________________________

*****************
*      MAKE     *
*****************
[root@localhost linuxwacom-0.6.3]# make
make  all-recursive
make[1]: Entre dans le r=E9pertoire `/opt/linuxwacom-0.6.3'
Making all in src
make[2]: Entre dans le r=E9pertoire `/opt/linuxwacom-0.6.3/src'
Making all in .
make[3]: Entre dans le r=E9pertoire `/opt/linuxwacom-0.6.3/src'
source=3D'wacomcfg.c' object=3D'wacomcfg.lo' libtool=3Dyes \
depfile=3D'.deps/wacomcfg.Plo' tmpdepfile=3D'.deps/wacomcfg.TPlo' \
depmode=3Dgcc3 /bin/sh ../depcomp \
/bin/sh ../libtool --mode=3Dcompile gcc -DHAVE_CONFIG_H -I. -I. -I..   =20
-Wall -pedantic -g -O2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include=20
-I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include=20
-I/usr/include/freetype2 -I/usr/include/glib-2.0=20
-I/usr/lib/glib-2.0/include   -c -o wacomcfg.lo `test -f 'wacomcfg.c' ||=20
echo './'`wacomcfg.c
mkdir .libs
gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -pedantic -g -O2=20
-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -c wacomcfg.c -MT=20
wacomcfg.lo -MD -MP -MF .deps/wacomcfg.TPlo  -fPIC -DPIC -o=20
.libs/wacomcfg.lo
wacomcfg.c: In function `WacomConfigSetRawParam':
wacomcfg.c:287: warning: dereferencing type-punned pointer will break=20
strict-aliasing rules
gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -pedantic -g -O2=20
-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -c wacomcfg.c -MT=20
wacomcfg.lo -MD -MP -MF .deps/wacomcfg.TPlo -o wacomcfg.o >/dev/null 2>&1
mv -f .libs/wacomcfg.lo wacomcfg.lo
/bin/sh ../libtool --mode=3Dlink gcc -Wall -pedantic -g -O2=20
-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include     -o=20
libwacomcfg.la -rpath /usr/local/lib -no-undefined -version-info 0:1:0=20
wacomcfg.lo -L/usr/X11R6/lib -lX11 -lXi -Wl,--export-dynamic=20
-lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm=20
-lpangoxft-1.0 -lpangox-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl=20
-lglib-2.0
rm -fr .libs/libwacomcfg.la .libs/libwacomcfg.* .libs/libwacomcfg.*
gcc -shared  wacomcfg.lo  -L/usr/X11R6/lib -lX11 -lXi -lgtk-x11-2.0=20
-lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0=20
-lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 =20
-Wl,--export-dynamic -Wl,-soname -Wl,libwacomcfg.so.0 -o=20
.libs/libwacomcfg.so.0.0.1
(cd .libs && rm -f libwacomcfg.so.0 && ln -s libwacomcfg.so.0.0.1=20
libwacomcfg.so.0)
(cd .libs && rm -f libwacomcfg.so && ln -s libwacomcfg.so.0.0.1=20
libwacomcfg.so)
ar cru .libs/libwacomcfg.a  wacomcfg.o
ranlib .libs/libwacomcfg.a
creating libwacomcfg.la
(cd .libs && rm -f libwacomcfg.la && ln -s ../libwacomcfg.la libwacomcfg.=
la)
source=3D'wacdump.c' object=3D'wacdump.o' libtool=3Dno \
depfile=3D'.deps/wacdump.Po' tmpdepfile=3D'.deps/wacdump.TPo' \
depmode=3Dgcc3 /bin/sh ../depcomp \
gcc -DHAVE_CONFIG_H -I. -I. -I..    -Wall -pedantic -g -O2=20
-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include   -c `test -f=20
'wacdump.c' || echo './'`wacdump.c
source=3D'wacscrn.c' object=3D'wacscrn.o' libtool=3Dno \
depfile=3D'.deps/wacscrn.Po' tmpdepfile=3D'.deps/wacscrn.TPo' \
depmode=3Dgcc3 /bin/sh ../depcomp \
gcc -DHAVE_CONFIG_H -I. -I. -I..    -Wall -pedantic -g -O2=20
-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include   -c `test -f=20
'wacscrn.c' || echo './'`wacscrn.c
source=3D'wactablet.c' object=3D'wactablet.o' libtool=3Dno \
depfile=3D'.deps/wactablet.Po' tmpdepfile=3D'.deps/wactablet.TPo' \
depmode=3Dgcc3 /bin/sh ../depcomp \
gcc -DHAVE_CONFIG_H -I. -I. -I..    -Wall -pedantic -g -O2=20
-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include   -c `test -f=20
'wactablet.c' || echo './'`wactablet.c
source=3D'wacserial.c' object=3D'wacserial.o' libtool=3Dno \
depfile=3D'.deps/wacserial.Po' tmpdepfile=3D'.deps/wacserial.TPo' \
depmode=3Dgcc3 /bin/sh ../depcomp \
gcc -DHAVE_CONFIG_H -I. -I. -I..    -Wall -pedantic -g -O2=20
-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include   -c `test -f=20
'wacserial.c' || echo './'`wacserial.c
source=3D'wacusb.c' object=3D'wacusb.o' libtool=3Dno \
depfile=3D'.deps/wacusb.Po' tmpdepfile=3D'.deps/wacusb.TPo' \
depmode=3Dgcc3 /bin/sh ../depcomp \
gcc -DHAVE_CONFIG_H -I. -I. -I..    -Wall -pedantic -g -O2=20
-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include   -c `test -f=20
'wacusb.c' || echo './'`wacusb.c
/bin/sh ../libtool --mode=3Dlink gcc -Wall -pedantic -g -O2=20
-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include     -o wacdump =20
wacdump.o wacscrn.o wactablet.o wacserial.o wacusb.o -lncurses=20
-Wl,--export-dynamic -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0=20
-lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpango-1.0=20
-lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
gcc -Wall -pedantic -g -O2 -I/usr/include/gtk-2.0=20
-I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -o wacdump wacdump.o=20
wacscrn.o wactablet.o wacserial.o wacusb.o -Wl,--export-dynamic =20
-lncurses -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm=20
-lpangoxft-1.0 -lpangox-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl=20
-lglib-2.0
source=3D'xidump.c' object=3D'xidump.o' libtool=3Dno \
depfile=3D'.deps/xidump.Po' tmpdepfile=3D'.deps/xidump.TPo' \
depmode=3Dgcc3 /bin/sh ../depcomp \
gcc -DHAVE_CONFIG_H -I. -I. -I..    -Wall -pedantic -g -O2=20
-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include   -c `test -f=20
'xidump.c' || echo './'`xidump.c
/bin/sh ../libtool --mode=3Dlink gcc -Wall -pedantic -g -O2=20
-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include     -o xidump=20
-L/usr/X11R6/lib -lX11 -lXi -lm xidump.o wacscrn.o -lncurses=20
-Wl,--export-dynamic -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0=20
-lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpango-1.0=20
-lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
gcc -Wall -pedantic -g -O2 -I/usr/include/gtk-2.0=20
-I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -o xidump xidump.o=20
wacscrn.o -Wl,--export-dynamic  -L/usr/X11R6/lib -lX11 -lXi -lncurses=20
-lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm=20
-lpangoxft-1.0 -lpangox-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl=20
-lglib-2.0
source=3D'xsetwacom.c' object=3D'xsetwacom.o' libtool=3Dno \
depfile=3D'.deps/xsetwacom.Po' tmpdepfile=3D'.deps/xsetwacom.TPo' \
depmode=3Dgcc3 /bin/sh ../depcomp \
gcc -DHAVE_CONFIG_H -I. -I. -I..    -Wall -pedantic -g -O2=20
-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include   -c `test -f=20
'xsetwacom.c' || echo './'`xsetwacom.c
/bin/sh ../libtool --mode=3Dlink gcc -Wall -pedantic -g -O2=20
-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include     -o xsetwacom =20
xsetwacom.o libwacomcfg.la -Wl,--export-dynamic -lgtk-x11-2.0=20
-lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0=20
-lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
gcc -Wall -pedantic -g -O2 -I/usr/include/gtk-2.0=20
-I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -o .libs/xsetwacom=20
xsetwacom.o -Wl,--export-dynamic  ./.libs/libwacomcfg.so=20
-L/usr/X11R6/lib -lX11 -lXi -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0=20
-lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpango-1.0=20
-lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--rpath -Wl,/usr/local/li=
b
creating xsetwacom
make[3]: Quitte le r=E9pertoire `/opt/linuxwacom-0.6.3/src'
Making all in wacomxi
make[3]: Entre dans le r=E9pertoire `/opt/linuxwacom-0.6.3/src/wacomxi'
source=3D'wacomxi.c' object=3D'wacomxi.lo' libtool=3Dyes \
depfile=3D'.deps/wacomxi.Plo' tmpdepfile=3D'.deps/wacomxi.TPlo' \
depmode=3Dgcc3 /bin/sh ../../depcomp \
/bin/sh ../../libtool --mode=3Dcompile gcc -DHAVE_CONFIG_H -I. -I.=20
-I../..    -Wall -g -O2 -I/usr/include/gtk-2.0=20
-I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include   -c -o wacomxi.lo=20
`test -f 'wacomxi.c' || echo './'`wacomxi.c
mkdir .libs
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -Wall -g -O2 -I/usr/include/gtk-2.0=20
-I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -c wacomxi.c -MT=20
wacomxi.lo -MD -MP -MF .deps/wacomxi.TPlo  -fPIC -DPIC -o .libs/wacomxi.l=
o
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -Wall -g -O2 -I/usr/include/gtk-2.0=20
-I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -c wacomxi.c -MT=20
wacomxi.lo -MD -MP -MF .deps/wacomxi.TPlo -o wacomxi.o >/dev/null 2>&1
mv -f .libs/wacomxi.lo wacomxi.lo
/bin/sh ../../libtool --mode=3Dlink gcc -Wall -g -O2=20
-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0=20
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2=20
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include     -o libwacomxi.la=20
-rpath /usr/local/lib/TkXInput -no-undefined wacomxi.lo -L/usr/X11R6/lib=20
-lX11 -lXi -Wl,--export-dynamic -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0=20
-lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpango-1.0=20
-lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
rm -fr .libs/libwacomxi.la .libs/libwacomxi.* .libs/libwacomxi.*
gcc -shared  wacomxi.lo  -L/usr/X11R6/lib -lX11 -lXi -lgtk-x11-2.0=20
-lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0=20
-lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 =20
-Wl,--export-dynamic -Wl,-soname -Wl,libwacomxi.so.0 -o=20
.libs/libwacomxi.so.0.0.0
(cd .libs && rm -f libwacomxi.so.0 && ln -s libwacomxi.so.0.0.0=20
libwacomxi.so.0)
(cd .libs && rm -f libwacomxi.so && ln -s libwacomxi.so.0.0.0 libwacomxi.=
so)
ar cru .libs/libwacomxi.a  wacomxi.o
ranlib .libs/libwacomxi.a
creating libwacomxi.la
(cd .libs && rm -f libwacomxi.la && ln -s ../libwacomxi.la libwacomxi.la)
make[3]: Quitte le r=E9pertoire `/opt/linuxwacom-0.6.3/src/wacomxi'
Making all in 2.4.22
make[3]: Entre dans le r=E9pertoire `/opt/linuxwacom-0.6.3/src/2.4.22'
gcc -I/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//include -Wall=20
-D__JEJ_DEBUG -D__KERNEL__ -DMODULE -DEXPORT_SYMTAB -DCONFIG_MODVERSIONS=20
-DMODVERSIONS -include=20
/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//include/linux/modversions.h=20
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common=20
-fomit-frame-pointer -pipe -mpreferred-stack-boundary=3D2 -march=3Di686 \
        -DKBUILD_BASENAME=3Dwacom -c -o wacom.o wacom.c
gcc -I/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//include=20
-I/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//drivers/usb -Wall=20
-D__JEJ_DEBUG -D__KERNEL__ -DMODULE -DEXPORT_SYMTAB -DCONFIG_MODVERSIONS=20
-DMODVERSIONS -include=20
/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//include/linux/modversions.h=20
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common=20
-fomit-frame-pointer -pipe -mpreferred-stack-boundary=3D2 -march=3Di686 \
        -DKBUILD_BASENAME=3Dhid-core -c -o hid-core.o hid-core.c
gcc -I/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//include=20
-I/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//drivers/usb -Wall=20
-D__JEJ_DEBUG -D__KERNEL__ -DMODULE -DEXPORT_SYMTAB -DCONFIG_MODVERSIONS=20
-DMODVERSIONS -include=20
/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//include/linux/modversions.h=20
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common=20
-fomit-frame-pointer -pipe -mpreferred-stack-boundary=3D2 -march=3Di686 \
        -DKBUILD_BASENAME=3Dhiddev -c -o hiddev.o hiddev.c
gcc -I/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//include=20
-I/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//drivers/usb -Wall=20
-D__JEJ_DEBUG -D__KERNEL__ -DMODULE -DEXPORT_SYMTAB -DCONFIG_MODVERSIONS=20
-DMODVERSIONS -include=20
/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//include/linux/modversions.h=20
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common=20
-fomit-frame-pointer -pipe -mpreferred-stack-boundary=3D2 -march=3Di686 \
        -DKBUILD_BASENAME=3Dhid-input -c \
        -o hid-input.o hid-input.c
ld -r -o hid.o hid-core.o hiddev.o hid-input.o
gcc -I/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//include=20
-I/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//drivers/usb -Wall=20
-D__JEJ_DEBUG -D__KERNEL__ -DMODULE -DEXPORT_SYMTAB -DCONFIG_MODVERSIONS=20
-DMODVERSIONS -include=20
/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//include/linux/modversions.h=20
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common=20
-fomit-frame-pointer -pipe -mpreferred-stack-boundary=3D2 -march=3Di686 \
        -DKBUILD_BASENAME=3Dusbmouse -c \
        -o usbmouse.o usbmouse.c
gcc -I/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//include -Wall=20
-D__JEJ_DEBUG -D__KERNEL__ -DMODULE -DEXPORT_SYMTAB -DCONFIG_MODVERSIONS=20
-DMODVERSIONS -include=20
/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//include/linux/modversions.h=20
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common=20
-fomit-frame-pointer -pipe -mpreferred-stack-boundary=3D2 -march=3Di686 \
        -DKBUILD_BASENAME=3Devdev -c -o evdev.o evdev.c
gcc -I/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//include -Wall=20
-D__JEJ_DEBUG -D__KERNEL__ -DMODULE -DEXPORT_SYMTAB -DCONFIG_MODVERSIONS=20
-DMODVERSIONS -include=20
/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//include/linux/modversions.h=20
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common=20
-fomit-frame-pointer -pipe -mpreferred-stack-boundary=3D2 -march=3Di686 \
        -DKBUILD_BASENAME=3Dmousedev -c -o mousedev.o mousedev.c
gcc -I/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//include -Wall=20
-D__JEJ_DEBUG -D__KERNEL__ -DMODULE -DEXPORT_SYMTAB -DCONFIG_MODVERSIONS=20
-DMODVERSIONS -include=20
/usr/src/linux-2.4.26-1.ll.rhfc1.ccrma//include/linux/modversions.h=20
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common=20
-fomit-frame-pointer -pipe -mpreferred-stack-boundary=3D2 -march=3Di686 \
        -DKBUILD_BASENAME=3Dinput -c -o input.o input.c
make[3]: Quitte le r=E9pertoire `/opt/linuxwacom-0.6.3/src/2.4.22'
make[2]: Quitte le r=E9pertoire `/opt/linuxwacom-0.6.3/src'
make[2]: Entre dans le r=E9pertoire `/opt/linuxwacom-0.6.3'
make[2]: Rien =E0 faire pour `all-am'.
make[2]: Quitte le r=E9pertoire `/opt/linuxwacom-0.6.3'
make[1]: Quitte le r=E9pertoire `/opt/linuxwacom-0.6.3'

*****************
*  MAKE INSTALL *
*****************
Making install in src
make[1]: Entre dans le r=E9pertoire `/opt/linuxwacom-0.6.3/src'
Making install in .
make[2]: Entre dans le r=E9pertoire `/opt/linuxwacom-0.6.3/src'
make[3]: Entre dans le r=E9pertoire `/opt/linuxwacom-0.6.3/src'
/bin/sh ../mkinstalldirs /usr/local/lib
 /bin/sh ../libtool --mode=3Dinstall /usr/bin/install -c  libwacomcfg.la=20
/usr/local/lib/libwacomcfg.la
/usr/bin/install -c .libs/libwacomcfg.so.0.0.1=20
/usr/local/lib/libwacomcfg.so.0.0.1
(cd /usr/local/lib && rm -f libwacomcfg.so.0 && ln -s=20
libwacomcfg.so.0.0.1 libwacomcfg.so.0)
(cd /usr/local/lib && rm -f libwacomcfg.so && ln -s libwacomcfg.so.0.0.1=20
libwacomcfg.so)
/usr/bin/install -c .libs/libwacomcfg.lai /usr/local/lib/libwacomcfg.la
/usr/bin/install -c .libs/libwacomcfg.a /usr/local/lib/libwacomcfg.a
ranlib /usr/local/lib/libwacomcfg.a
chmod 644 /usr/local/lib/libwacomcfg.a
PATH=3D"$PATH:/sbin" ldconfig -n /usr/local/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /usr/local/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/bin/sh ../mkinstalldirs /usr/local/bin
  /bin/sh ../libtool --mode=3Dinstall /usr/bin/install -c wacdump=20
/usr/local/bin/wacdump
/usr/bin/install -c wacdump /usr/local/bin/wacdump
  /bin/sh ../libtool --mode=3Dinstall /usr/bin/install -c xidump=20
/usr/local/bin/xidump
/usr/bin/install -c xidump /usr/local/bin/xidump
  /bin/sh ../libtool --mode=3Dinstall /usr/bin/install -c xsetwacom=20
/usr/local/bin/xsetwacom
/usr/bin/install -c .libs/xsetwacom /usr/local/bin/xsetwacom
/bin/sh ../mkinstalldirs /usr/local/include/wacomcfg
 /usr/bin/install -c -m 644 wacomcfg.h=20
/usr/local/include/wacomcfg/wacomcfg.h
/bin/sh ../mkinstalldirs /usr/X11R6/lib/modules/input
make[3]: Quitte le r=E9pertoire `/opt/linuxwacom-0.6.3/src'
make[2]: Quitte le r=E9pertoire `/opt/linuxwacom-0.6.3/src'
Making install in wacomxi
make[2]: Entre dans le r=E9pertoire `/opt/linuxwacom-0.6.3/src/wacomxi'
make[3]: Entre dans le r=E9pertoire `/opt/linuxwacom-0.6.3/src/wacomxi'
make[3]: Rien =E0 faire pour `install-exec-am'.
/bin/sh ../../mkinstalldirs /usr/local/bin
 /usr/bin/install -c wacomcpl /usr/local/bin/wacomcpl
 /usr/bin/install -c wacomcpl-exec /usr/local/bin/wacomcpl-exec
/bin/sh ../../mkinstalldirs /usr/local/lib/TkXInput
 /usr/bin/install -c -m 644 pkgIndex.tcl=20
/usr/local/lib/TkXInput/pkgIndex.tcl
/bin/sh ../../mkinstalldirs /usr/local/lib/TkXInput
 /bin/sh ../../libtool --mode=3Dinstall /usr/bin/install -c  libwacomxi.l=
a=20
/usr/local/lib/TkXInput/libwacomxi.la
/usr/bin/install -c .libs/libwacomxi.so.0.0.0=20
/usr/local/lib/TkXInput/libwacomxi.so.0.0.0
(cd /usr/local/lib/TkXInput && rm -f libwacomxi.so.0 && ln -s=20
libwacomxi.so.0.0.0 libwacomxi.so.0)
(cd /usr/local/lib/TkXInput && rm -f libwacomxi.so && ln -s=20
libwacomxi.so.0.0.0 libwacomxi.so)
/usr/bin/install -c .libs/libwacomxi.lai=20
/usr/local/lib/TkXInput/libwacomxi.la
/usr/bin/install -c .libs/libwacomxi.a /usr/local/lib/TkXInput/libwacomxi=
.a
ranlib /usr/local/lib/TkXInput/libwacomxi.a
chmod 644 /usr/local/lib/TkXInput/libwacomxi.a
PATH=3D"$PATH:/sbin" ldconfig -n /usr/local/lib/TkXInput
----------------------------------------------------------------------
Libraries have been installed in:
   /usr/local/lib/TkXInput

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[3]: Quitte le r=E9pertoire `/opt/linuxwacom-0.6.3/src/wacomxi'
make[2]: Quitte le r=E9pertoire `/opt/linuxwacom-0.6.3/src/wacomxi'
Making install in 2.4.22
make[2]: Entre dans le r=E9pertoire `/opt/linuxwacom-0.6.3/src/2.4.22'
make[3]: Entre dans le r=E9pertoire `/opt/linuxwacom-0.6.3/src/2.4.22'
make[3]: Rien =E0 faire pour `install-exec-am'.
make[3]: Rien =E0 faire pour `install-data-am'.
make[3]: Quitte le r=E9pertoire `/opt/linuxwacom-0.6.3/src/2.4.22'
make[2]: Quitte le r=E9pertoire `/opt/linuxwacom-0.6.3/src/2.4.22'
make[1]: Quitte le r=E9pertoire `/opt/linuxwacom-0.6.3/src'
make[1]: Entre dans le r=E9pertoire `/opt/linuxwacom-0.6.3'
make[2]: Entre dans le r=E9pertoire `/opt/linuxwacom-0.6.3'
make[2]: Rien =E0 faire pour `install-exec-am'.
make[2]: Rien =E0 faire pour `install-data-am'.
make[2]: Quitte le r=E9pertoire `/opt/linuxwacom-0.6.3'
make[1]: Quitte le r=E9pertoire `/opt/linuxwacom-0.6.3'