RE: [Linuxwacom-discuss] Problem with Graphire3

[Ping L. <pin...@ho...>]

Which wacom.o are you using? You need to use the one from linuxwacom. Please 
use 0.5.3-beta since it is the newest one.

Ping


>From: Pirani Enrico <pi...@vo...>
>To: lin...@li...
>Subject: [Linuxwacom-discuss] Problem with Graphire3
>Date: Sun, 30 Nov 2003 14:47:06 +0100
>
>Hi list,
>
>I've just plugged Graphire 3 on a Slack 9.0 box. The kernel recognized the 
>tablet with this log:
>
>wacom.c: v1.21.3 Vojtech Pavlik <vo...@su...>
>wacom.c: USB Wacom Graphire and Wacom Intuos tablet driver
>hub.c: new USB device 00:14.3-1, assigned address 2
>usb.c: USB device 2 (vend/prod 0x56a/0x13) is not claimed by any active 
>driver.
>usb.c: registered new driver usb_mouse
>usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
>usb.c: registered new driver hiddev
>usb.c: registered new driver hid
>input0,hiddev0: USB HID v1.00 Mouse [WACOM CTE-430-UV3.1-4] on usb2:2.0
>hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vo...@su...>
>hid-core.c: USB HID support drivers
>mice: PS/2 mouse device common for all mice
>....
>
>And testing for event0 with xxd I get :
>0000000: 21fb c73f d44c 0700 0200 0000 feff ffff  !..?.L..........
>0000010: 21fb c73f dd4c 0700 0200 0100 ffff ffff  !..?.L..........
>0000020: 21fb c73f 5f8b 0700 0200 0000 fdff ffff  !..?_...........
>0000030: 21fb c73f 6b8b 0700 0200 0100 feff ffff  !..?k...........
>0000040: 21fb c73f 9caa 0700 0200 0000 feff ffff  !..?............
>0000050: 21fb c73f a5aa 0700 0200 0100 feff ffff  !..?............
>0000060: 21fb c73f 1be9 0700 0200 0000 feff ffff  !..?............
>0000070: 21fb c73f 27e9 0700 0200 0100 ffff ffff  !..?'...........
>
>Using wacdump I've this log:
>MODEL=Unknown                           ROM=3.1-4
>CLS=USB  VNDR=Unknown  DEV=Unknown  SUB=UNKNOWN
>
>EE FC C7 3F CC A0 06 00 02 00 01 00 FD FF FF FF             
>...?............
>
>
>BUTTON=+00000 (+00000 .. +00000)      RELWHEEL=+00000 (-00001 .. +00001)
>
>   LEFT=             MIDDLE=              RIGHT=              EXTRA=
>   SIDE=              TOUCH=             STYLUS=            STYLUS2=
>
>The problem is that after restarting X I've only the PS/2 mouse working but 
>not the tablet.
>I can get the mouse and pen "working" just with the IMPS/2 driver in the 
>mouse section...But that is just bull..
>Anyway if I try xidump I get
>./xidump -l -v eraser
>eraser                         extension
>   key: min=8, max=39, num=32
>   btn: num=1
>   val: axes=6 mode=abs buf=0
>   axis[0]: res=0, max=0, max=0
>   axis[1]: res=0, max=0, max=0
>   axis[2]: res=49999, max=0, max=240
>   axis[3]: res=128, max=-64, max=63
>   axis[4]: res=128, max=-64, max=63
>   axis[5]: res=128, max=0, max=1023
>But with the raw option I get no output (just the little window).
>Here is my Xconfig section
>..........
>Identifier    "Mouse1"
>   Driver    "mouse"
>   Option "Protocol"    "PS/2"
>   Option "Device"      "/dev/mouse"
>.........
>Section "InputDevice"
>Driver        "wacom"
>Identifier    "cursor"
>Option        "Device"        "/dev/input/event0"   # USB ONLY
>Option        "Type"          "cursor"
>Option        "Mode"          "relative"
>Option        "Speed"         "3.0"
>Option        "USB"           "on"                  # USB ONLY
>Option        "Threshold"     "10"
>EndSection
>
>Section "InputDevice"
>Driver        "wacom"
>Identifier    "stylus"
>
>Option        "Device"        "/dev/input/event0"   # USB ONLY
>Option        "Type"          "stylus"
>Option        "Mode"          "absolute"
>Option        "USB"           "on"                  # USB ONLY
>Option        "Tilt"          "on"
>Option        "TiltInvert"    "on"
>Option        "Threshold"     "10"
>EndSection
>Section "InputDevice"
>Driver        "wacom"
>Identifier    "eraser"
>Option        "Device"        "/dev/input/event0"   # USB ONLY
>Option        "Type"          "eraser"
>Option        "Mode"          "absolute"
>Option        "USB"           "on"                  # USB ONLY
>Option        "Tilt"          "on"
>Option        "TiltInvert"    "on"
>Option        "Threshold"     "10"
>EndSection
>
>#Section "InputDevice"
># Driver        "wacom"
># Identifier    "tablet"
># Option        "Device"        "/dev/input/event0"
># Option        "Type"          "beta"
>#EndSection
>
>InputDevice "Mouse1" "CorePointer"
>   InputDevice "Keyboard1" "CoreKeyboard"
>   InputDevice    "cursor"    "SendCoreEvents"
>   InputDevice    "stylus"    "SendCoreEvents"          InputDevice    
>"eraser"    "SendCoreEvents"
>  # InputDevice    "tablet"    "SendCoreEvents"
>EndSection
>
>Any help?
>Enrico
>
>
>
>
>
>
>
>-------------------------------------------------------
>This SF.net email is sponsored by: SF.net Giveback Program.
>Does SourceForge.net help you be more productive?  Does it
>help you create better code?  SHARE THE LOVE, and help us help
>YOU!  Click Here: http://sourceforge.net/donate/
>_______________________________________________
>Linuxwacom-discuss mailing list
>Lin...@li...
>https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss

_________________________________________________________________
STOP MORE SPAM with the new MSN 8 and get 2 months FREE*   
http://join.msn.com/?page=dept/bcomm&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca