Re: [Linuxwacom-discuss] 12WX problem

[Alex C. <ale...@ca...>]

Some 'progress' in addition to my previous email.

I noted that pressure sensitivity never worked. Also the mouse came up
as an extended device. Also xsetwacom hit the same error as wacomcpl
when making changes to the devices.

So I decided to see what xorg 7.3 / xserver 1.4 would do for me...

Step by step what is now working / not working

X - wacom driver is now installed again and loads (0.7.8-6 - confirmed)
kernel driver is still 0.7.9-6 - confirmed
Tablet is detected in /proc/bus/usb/devices and assigned to wacom

The tablet works as an absolute cursor in X, and the pad scroll bars work.
wacdump still has no clue what the tablet is, but all the buttons, bars
and the pen are interpreted
Wacomcpl loads but finds no tablet
xsetwacom lists no devices but will 'get' the settings from them if you
ask it (ie: xsetwacom get stylus TopX etc... work)
xidump -l gives this:

Virtual core keyboard          keyboard
Virtual core pointer           disabled
pad                            unknown
eraser                         unknown
stylus                         unknown
Keyboard0                      unknown
Mouse                          unknown

and /var/log/Xorg.0.log has this section:

<snip>
(**) Option "CorePointer"
(**) Mouse: always reports core events
(II) Mouse: Found 4 relative axes.
(II) Mouse: Configuring as pointer.
(II) Mouse: Found 16 mouse buttons
(II) Mouse: Configured 21 mouse buttons.
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "xkb_rules" "xorg"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "gb"
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/input/event5
(**) stylus is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) stylus: reading USB link
(**) Option "BaudRate" "9600"
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/input/event5
(**) eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) eraser: reading USB link
(**) Option "BaudRate" "9600"
(**) pad: always reports core events
(**) pad device is /dev/input/event5
(**) pad is in relative mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) pad: reading USB link
(**) Option "BaudRate" "9600"
(II) evaluating device (pad)
(II) XINPUT: Adding extended input device "pad" (type: Wacom Pad)
(II) evaluating device (eraser)
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) evaluating device (stylus)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse)
(II) XINPUT: Adding extended input device "Mouse" (type: MOUSE)
(**) Option "Device" "/dev/input/event5"
pad Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 61 for button 1
(==) Wacom USB CintiqV5 tablet speed=9600 maxX=53020 maxY=33440
maxZ=1023 resX=$
(==) Wacom device "pad" top X=0 top Y=0 bottom X=53020 bottom Y=33440
(==) Wacom device "eraser" top X=0 top Y=0 bottom X=53020 bottom Y=33440
(==) Wacom device "stylus" top X=0 top Y=0 bottom X=53020 bottom Y=33440
evdev: leds are 0x0 for device 5
(II) Keyboard0: Init
(**) Mouse: 2 valuators.
(**) Mouse: Configuring in Absolute mode.
(**) Mouse: Registering 21 buttons.
(II) Mouse: Init
(II) Keyboard0: On
(II) Mouse: On
evdev: leds are 0x0 for device 5
SetClientVersion: 0 9
SetKbdSettings - type: 8273892 rate: 30 delay: 500 snumlk: 0
evdev: leds are 0x0 for device 5
evdev: leds are 0x0 for device 5
</snip>

And the relevant extracts of my xorg.conf:

Section "ServerLayout"
   Identifier     "X.org Configured"
   Screen       "Screen0" 0 0
   InputDevice    "Mouse" "CorePointer"
   InputDevice    "Keyboard0" "CoreKeyboard"
   InputDevice    "stylus" "SendCoreEvents"
   InputDevice    "eraser" "SendCoreEvents"
   InputDevice    "pad"
EndSection

Section "InputDevice"
   Identifier     "Mouse"
   Driver         "evdev"
   Option         "Device" "/dev/input/event2"
   Option         "HWHEELRelativeAxisButtons" "7 6"
EndSection
 
Section "InputDevice"
# Driver "kbd"
# Option "Name" "Logitech USB Receiver"
# Option "XkbModel" "pc102"
   Identifier     "Keyboard0"
   Driver         "evdev"
   Option         "Device" "/dev/input/event3"
   Option         "AutoRepeat" "500 30"
   Option         "XkbRules" "xorg"
   Option    "XkbModel" "evdev"
   Option         "XkbLayout" "gb"
# Option "XkbVariant" "intl"
EndSection
 
Section "InputDevice"
   Identifier     "stylus"
   Driver         "wacom"
   Option         "Type" "stylus"
#    Option         "Mode" "Absolute"
   Option         "USB" "on"
# Option "Name" "Wacom Graphire3"
   Option         "Device" "/dev/input/event5"
EndSection
 
Section "InputDevice"
   Identifier     "eraser"
   Driver         "wacom"
   Option         "Type" "eraser"
#    Option         "Mode" "Absolute"
   Option         "USB" "on"
# Option "Name" "Wacom Graphire3"
   Option         "Device" "/dev/input/event5"
EndSection
 
Section "InputDevice"
   Identifier     "pad"
   Driver         "wacom"
   Option         "Type" "pad"
   Option         "USB" "on"
# Option "Name" "Wacom Graphire3"
   Option         "Device" "/dev/input/event5"
EndSection


I am stumped...

Alex