From: Pawel R. <po...@lu...> - 2007-09-15 10:35:10
|
Hi, After upgrading to xorg-server-1.4 (I'am using Gentoo) I ran into problems with my Wacom stylus on my TabletPC. Something is wrong with the resolution and I don't know how to calibrate it. When I move my stylus just 1 inch off the top left corner the cursor moves all the way to the bottom right. I played around with the bottomX and bottomY parameters but with no success. I tried both linuxwacom-0.7.7-12 and linuxwacom-0.7.6-4 Before I used linuxwacom-0.7.6-4 and the following configuration and it worked beautifully. Thanks for any help Pawel Section "InputDevice" Driver "wacom" Identifier "cursor" Option "Device" "/dev/ttyS0" Option "ForceDevice" "ISDV4" Option "Type" "cursor" Option "Mode" "absolute" Option "Speed" "3.0" Option "Threshold" "2" Option "Tilt" "on" EndSection Section "InputDevice" Driver "wacom" Identifier "stylus" Option "Device" "/dev/ttyS0" Option "Type" "stylus" Option "ForceDevice" "ISDV4" Option "Mode" "absolute" Option "Tilt" "on" Option "Threshold" "2" Option "Button2" "3" Option "Stylus2" "5" EndSection Section "InputDevice" Driver "wacom" Identifier "eraser" Option "Device" "/dev/ttyS0" Option "ForceDevice" "ISDV4" Option "Type" "eraser" Option "Mode" "absolute" Option "Tilt" "on" Option "Threshold" "2" Option "Button3" "2" # Option "BottomX" "28570" # Option "BottomY" "21430" EndSection -- View this message in context: http://www.nabble.com/Problem-with-resolution-in-xorg-server-1.4-tf4447340.html#a12689200 Sent from the linuxwacom-devel mailing list archive at Nabble.com. |