Menu
▾
▴
[Linux-fbdev-devel] [PATCH] cirrusfb: use modedb and add mode_option parameter (2nd rev)
|
From: Krzysztof H. <krz...@po...> - 2008-09-02 16:45:34
|
From: Krzysztof Helt <krz...@wp...>
cirrusfb: use modedb and add mode_option parameter
Use modedb for initial mode instead of table
of few predefined modes.
Add mode_option module parameter as a step toward
unification of frame buffers' parameters.
Signed-off-by: Krzysztof Helt <krz...@wp...>
---
The 640x480@60 mode was dropped as well.
drivers/video/cirrusfb.c | 126 ++++++++--------------------------------------
1 files changed, 21 insertions(+), 105 deletions(-)
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index 0eb429a..4c16b68 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -372,98 +372,8 @@ struct cirrusfb_info {
void (*unmap)(struct fb_info *info);
};
-static unsigned cirrusfb_def_mode = 1;
static int noaccel;
-
-/*
- * Predefined Video Modes
- */
-
-static const struct {
- const char *name;
- struct fb_var_screeninfo var;
-} cirrusfb_predefined[] = {
- {
- /* autodetect mode */
- .name = "Autodetect",
- }, {
- /* 640x480, 31.25 kHz, 60 Hz, 25 MHz PixClock */
- .name = "640x480",
- .var = {
- .xres = 640,
- .yres = 480,
- .xres_virtual = 640,
- .yres_virtual = 480,
- .bits_per_pixel = 8,
- .red = { .length = 8 },
- .green = { .length = 8 },
- .blue = { .length = 8 },
- .width = -1,
- .height = -1,
- .pixclock = 40000,
- .left_margin = 48,
- .right_margin = 16,
- .upper_margin = 32,
- .lower_margin = 8,
- .hsync_len = 96,
- .vsync_len = 4,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED
- }
- }, {
- /* 800x600, 48 kHz, 76 Hz, 50 MHz PixClock */
- .name = "800x600",
- .var = {
- .xres = 800,
- .yres = 600,
- .xres_virtual = 800,
- .yres_virtual = 600,
- .bits_per_pixel = 8,
- .red = { .length = 8 },
- .green = { .length = 8 },
- .blue = { .length = 8 },
- .width = -1,
- .height = -1,
- .pixclock = 20000,
- .left_margin = 128,
- .right_margin = 16,
- .upper_margin = 24,
- .lower_margin = 2,
- .hsync_len = 96,
- .vsync_len = 6,
- .vmode = FB_VMODE_NONINTERLACED
- }
- }, {
- /*
- * Modeline from XF86Config:
- * Mode "1024x768" 80 1024 1136 1340 1432 768 770 774 805
- */
- /* 1024x768, 55.8 kHz, 70 Hz, 80 MHz PixClock */
- .name = "1024x768",
- .var = {
- .xres = 1024,
- .yres = 768,
- .xres_virtual = 1024,
- .yres_virtual = 768,
- .bits_per_pixel = 8,
- .red = { .length = 8 },
- .green = { .length = 8 },
- .blue = { .length = 8 },
- .width = -1,
- .height = -1,
- .pixclock = 12500,
- .left_margin = 144,
- .right_margin = 32,
- .upper_margin = 30,
- .lower_margin = 2,
- .hsync_len = 192,
- .vsync_len = 6,
- .vmode = FB_VMODE_NONINTERLACED
- }
- }
-};
-
-#define NUM_TOTAL_MODES ARRAY_SIZE(cirrusfb_predefined)
+static char *mode_option __devinitdata = "640x480@60";
/****************************************************************************/
/**** BEGIN PROTOTYPES ******************************************************/
@@ -2267,23 +2177,27 @@ static int cirrusfb_register(struct fb_info *info)
/* sanity checks */
assert(btype != BT_NONE);
+ /* set all the vital stuff */
+ cirrusfb_set_fbinfo(info);
+
DPRINTK("cirrusfb: (RAM start set to: 0x%p)\n", info->screen_base);
- /* Make pretend we've set the var so our structures are in a "good" */
- /* state, even though we haven't written the mode to the hw yet... */
- info->var = cirrusfb_predefined[cirrusfb_def_mode].var;
+ err = fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 8);
+ if (!err) {
+ DPRINTK("wrong initial video mode\n");
+ err = -EINVAL;
+ goto err_dealloc_cmap;
+ }
+
info->var.activate = FB_ACTIVATE_NOW;
err = cirrusfb_decode_var(&info->var, &cinfo->currentmode, info);
if (err < 0) {
/* should never happen */
DPRINTK("choking on default var... umm, no good.\n");
- goto err_unmap_cirrusfb;
+ goto err_dealloc_cmap;
}
- /* set all the vital stuff */
- cirrusfb_set_fbinfo(info);
-
err = register_framebuffer(info);
if (err < 0) {
printk(KERN_ERR "cirrusfb: could not register "
@@ -2296,7 +2210,6 @@ static int cirrusfb_register(struct fb_info *info)
err_dealloc_cmap:
fb_dealloc_cmap(&info->cmap);
-err_unmap_cirrusfb:
cinfo->unmap(info);
framebuffer_release(info);
return err;
@@ -2608,17 +2521,17 @@ static int __init cirrusfb_setup(char *options) {
return 0;
while ((this_opt = strsep(&options, ",")) != NULL) {
- if (!*this_opt) continue;
+ if (!*this_opt)
+ continue;
DPRINTK("cirrusfb_setup: option '%s'\n", this_opt);
- for (i = 0; i < NUM_TOTAL_MODES; i++) {
- sprintf(s, "mode:%s", cirrusfb_predefined[i].name);
- if (strcmp(this_opt, s) == 0)
- cirrusfb_def_mode = i;
- }
if (!strcmp(this_opt, "noaccel"))
noaccel = 1;
+ else if (!strncmp(this_opt, "mode:", 5))
+ mode_option = this_opt + 5;
+ else
+ mode_option = this_opt;
}
return 0;
}
@@ -2644,6 +2557,9 @@ static void __exit cirrusfb_exit(void)
module_init(cirrusfb_init);
+module_param(mode_option, charp, 0);
+MODULE_PARM_DESC(mode_option, "Initial video mode e.g. '648x480-8@60'");
+
#ifdef MODULE
module_exit(cirrusfb_exit);
#endif
--
1.5.2.2
---------------------------------------------------------------
Nasilaja sie kradzieze.
Mieszkancy osiedli zaniepokojeni.
Prosimy o pomoc w tej sprawie >>> http://link.interia.pl/f1eef
|