From: Matthew H. <ma...@ar...> - 2007-02-13 01:07:31
|
Hi, I have an obscure Pentium M motherboard with 855GME graphics (http://www.ibase-i.com.tw/mb890.htm) which I'm trying to use with a DVI monitor for video playback. On compiling intelfb into 2.6.20, the fb fails to load with a boot option of video=intelfb:1024x768-24@75 with intelfb: intelfb_init intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets intelfb: Version 0.9.4 intelfb: intelfb_setup intelfb: options: 1024x768-24@75 intelfb: intelfb_pci_register intelfb: fb aperture: 0xd8000000/0x8000000, MMIO region: 0xec080000/0x80000 intelfb: 00:02.0: Intel(R) 855GME, aperture size 128MB, stolen memory 32636kB intelfb: fb: 0xd8000000(+ 0x0)/0x1fdf000 (0xde980000) intelfb: MMIO: 0xec080000/0x80000 (0xe3980000) intelfb: ring buffer: 0xdb001000/0x10000 (0xe1981000) intelfb: HW cursor: 0x0/0x0 (0x00000000) (offset 0x0) (phys 0x0) intelfb: options: vram = 4, accel = 1, hwcursor = 0, fixed = 0, noinit = 0 intelfb: options: mode = "1024x768-24@75" intelfb: Non-CRT device is enabled ( DVO port C ). Disabling mode switching. intelfb: Video mode must be programmed at boot time. intelfb: cleanup I'm confused: I thought that I /was/ trying to program the video mode at boot time by specifying the video= boot option. Or is this trying to tell me that there's actually no support of Non-CRT at all? Specifying vga= options in lilo.conf and disabling/enabling vesafb doesn't seem to alter the behaviour. Should this work? thanks, Matthew. |