From: Peter 'p. De S. <p2...@mi...> - 2004-11-16 17:07:16
|
Hi, I'm having some performance problems with the ATM 8260 driver. I'm using a custom MPC8260 based board. The CPU core runs at 300Mhz and the CPM runs at 200Mhz. 1 FCC is configured for fast ethernet, 1 is configured for ATM and connected to a Zarlink MT90503 via an 8bit Utopia interface. the Utopia interface is clocked at 50Mhz. The 3th FCC is unused. The maximum bitrate I manage to get out of the 8260 is about 2Mbit/s. I use 1 VC in UBR mode. The transmitter is configured for internal rate.=20 Any ideas why the maximum throughput I get is about 2Mbit/s ? Thanks, Peter. |