From: Tim P <pan...@gm...> - 2005-07-27 21:40:54
|
Ipsec establishes it's connection but windows is unable to authenticate with l2tp. I see nothing in /var/log/l2tpns to indicate it does anything other than start. Here is my /etc/l2tpns/startup-config set debug 2 set log_file "/var/log/l2tpns" set pid_file "/var/run/l2tpns.pid" set l2tp_secret "secret" set primary_dns 192.168.1.1 set secondary_dns 198.110.24.14 set save_state yes set primary_radius 192.168.1.254 set secondary_radius 1.2.3.7 set radius_accounting yes set radius_secret "radiussecret" set bind_address 192.168.1.2 set throttle_speed 64 set accounting_dir "/var/run/l2tpns/acct" set setuid 0 set dump_speed no #load plugin "garden" load plugin "throttlectl" load plugin "autothrottle" load plugin "snoopctl" load plugin "autosnoop" Here is my /var/log/l2tpns file: [root@redguard ~]# tail -f /var/log/l2tpns 2005-07-27 17:27:41 00/00 Can't write state information: No such file or directory 2005-07-27 17:27:41 00/00 Clean shutdown complete 2005-07-27 17:29:45 00/00 L2TPNS version 2.0.23 2005-07-27 17:29:45 00/00 Copyright (c) 2003, 2004, 2005 Optus Internet Engineering 2005-07-27 17:29:45 00/00 Copyright (c) 2002 FireBrick (Andrews & Arnold Ltd / Watchfront Ltd) - GPL licenced 2005-07-27 17:29:45 00/00 Set up on interface tun0 2005-07-27 17:29:45 00/00 IP address pool is 0 addresses 2005-07-27 17:30:00 00/00 Master timed out! Holding election... 2005-07-27 17:30:00 00/00 I am declaring myself the master! 2005-07-27 17:30:00 00/00 Warning: Fixed 59999 uninitialized sessions in becoming master! My network settings: eth0 is "outside" and eth1 is "inside" [root@redguard l2tpns]# ifconfig eth0 Link encap:Ethernet HWaddr 00:20:78:18:9E:D6 inet addr:192.168.1.254 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::220:78ff:fe18:9ed6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:833 errors:0 dropped:0 overruns:0 frame:0 TX packets:1506 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:81865 (79.9 KiB) TX bytes:244023 (238.3 KiB) Interrupt:11 Base address:0xe800 eth1 Link encap:Ethernet HWaddr 00:0E:0C:05:84:70 inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::20e:cff:fe05:8470/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:116 errors:0 dropped:0 overruns:0 frame:0 TX packets:84 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15939 (15.5 KiB) TX bytes:10275 (10.0 KiB) Base address:0xe400 Memory:ea000000-ea020000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:560 (560.0 b) TX bytes:560 (560.0 b) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.1.2 P-t-P:192.168.1.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Any ideas? |