From: Tony P. <ap...@ea...> - 2004-08-21 03:26:24
|
On Fri, 2004-08-20 at 19:14, Jon Berndt wrote: > > It must be possible to input control surface angles into JSBSim since > > FlightGear must do this in order for a pilot to be able to control an > > airplane in flight. Furthermore it must be possible to control the control > > surfaces without any processing in between (as in a simple gain between the > > joystick and the control surfaces.) Yet I have not seen any documentation on > > this interface. Is it in the (currently withdrawn) User's Manual? Am I right > > in stating the above, Jon? > > Ahhh! I see what you want to do, now. Yes, it is most certainly possible to do this. In > fact, You can do this from a script. One can set the pilot inputs via a script. Then the > pilot inputs are processed by the control laws to arrive at aerosurface deflections. > However, if the pilot inputs and processing (control laws) are NOT there, then the > aerosurfaces will not be set - UNLESS they are set directly. All you have to do is - prior > to calling the FGFDMExec::Run() function - set the aerosurface deflections "manually". Or set up an FCS within the JSBSim config file that has a simple gain of 1 for each control axis. Then the pilot inputs will be directly connected to the control surfaces. > > Jon > > > > ------------------------------------------------------- > SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media > 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 > Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift. > http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 > _______________________________________________ > Jsbsim-devel mailing list > Jsb...@li... > https://lists.sourceforge.net/lists/listinfo/jsbsim-devel > _______________________________________________ > The JSBSim Flight Dynamics Model project > http://www.JSBSim.org > _______________________________________________ -- Tony Peden <ap...@ea...> |