Re: [Jfs-discussion] Logredo failed with errno: 217
Brought to you by:
blaschke-oss,
shaggyk
From: Dave K. <sh...@au...> - 2005-04-26 20:01:48
|
On Tue, 2005-04-26 at 15:41 -0400, Daniel Savard wrote: > I ran jfs_fsck from the LiveCD again with the --omit_journal_replay. I > am getting the following messages at Phase 8. That is consistent with > what I observed when originally running the fsck from the LiveCD, at > boot time it just stopped on the return code 271, but when ran manually > it continues and display these messages: > > ata1: status=0x51 { DriveReady SeekComplete Error } > ata1: error=0x40 { UncorrectableError } > scsi0: ERROR on channel 0, id 0, lun 0, CDB: 0x28 00 00 If 61 57 00 00 > 01 00 > Current sda: sens = 70 3 > ASC=11 ASCQ= 4 > Raw sense data:0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x8a 0x00 0x00 0x00 > 0x00 0x11 0x04 0x00 0x00 0x00 0x00 > end_request: I/O error, dev sda, sector 2056535 > Buffer I/O error on device sda3, logical block 215 > Unrecoverable error reading M from /dev/sda3. CANNOT CONTINUE. > > This message repeats itself many times for something like 10 sectors, > except the last line which appears once at the end of the last message. > > This is the same kind of messages I am getting with other filesystems. > > I was not able to capture the output with a redirection into a file of > both stdout and stderr, so, I had to type everything by hand. At the > beginning, there is a few ata1:.... messages something like twice the > first two lines and the the scsi0: ERROR... These messages are going straight to the console. You can capture them with dmesg > somefile It looks like your disk is bad. I think this is a hardware problem. -- David Kleikamp IBM Linux Technology Center |