Re: [Iscsitarget-devel] IET failed to add volumePath=/dev/hda

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

On Wed, 2006-03-22 at 16:02 +0100, Miroslav Pragl wrote:
> is it reasonable to share complete disc you boot from :-O ?
> 
> try sharing file or USB disc (will be somethingg like /dev/sd*) first, 
> better make sure you specify type
> 
> Lun 0 Path=/dev/sdc,Type=fileio (case sensitive!)
> 
> MP

yes, case sensitive. Type=fileio is optional. but no blankspace after
that for some old iet version. new code fixed that bug.

> 
> ----- Original Message ----- 
> From: "K.Prakash Kulandaivelu" <vis...@gm...>
> To: <isc...@li...>
> Sent: Wednesday, March 22, 2006 7:07 AM
> Subject: [Iscsitarget-devel] IET failed to add volumePath=/dev/hda
> 
> 
> Greetings All,
> i got problem in configuring the IET.
> i have the following version
>     iSCSI Enterprise Target Software - version 0.4.1
> kernel version:
>     Linux iSCSI 2.6.11-1.1369_FC4 #1 Thu Jun 2 22:55:56 EDT 2005 i686
> i686 i386 GNU/Linux
> 
> i followed the link to setup the target:
> "http://fedoranews.org/mediawiki/index.php/Going_Enterprise_-_setup_your_FC4_iSCSI_target_in_5_minutes"
> Going Enterprise - setup your FC4 iSCSI target in 5 minutes
> >From FedoraNEWS.ORG
> 
> Written by Anze Vidmar on 2005-10-04
> 
> the setps i followed
> first i edited the make file to the kernel src
> 
> KERNELSRC=/usr/src/kernels/2.6.11-1.1369_FC4-i686
> 
> them
> 
> make
> make install
> 
> i edited a new file named ietd.conf in /etc
> 
> [root@iSCSI etc]# cat ietd.conf
> Target iqn.2009-08.local.fog:storage.lvm
>         # Users, who can access this target
>         # (no users means anyone can access the target)
>         #IncomingUser
>         #OutgoingUser
>         # Lun definition
>         # (right now only block devices are possible)
>         Lun 0 Path=/dev/hda
>         # Alias name for this target
>         Alias iSCSI
>         # various iSCSI parameters
>         # (not all are used right now, see also iSCSI spec
> 
> i restarted the machine,after rebooting ,the cmds and output
> 
> [root@iSCSI init.d]# ./iscsi-target start
> Starting iSCSI target service:                             [  OK  ]
> [root@iSCSI init.d]# tail -f /var/log/messages
> Mar 22 11:22:15 iSCSI kernel: iSCSI Enterprise Target Software - version 
> 0.4.1
> Mar 22 11:22:15 iSCSI kernel: iotype_init(92) register fileio
> Mar 22 11:22:15 iSCSI kernel: iet_target_param_set(127) d 1 8192
> 262144 65536 2 20 8 0
> Mar 22 11:22:15 iSCSI iscsid: failed to add volumePath=/dev/hda
> 
> 
> this cmd stops here itself
> 
> my fdisk details
> [root@iSCSI init.d]# fdisk -l
> 
> Disk /dev/hda: 40.0 GB, 40020664320 bytes
> 255 heads, 63 sectors/track, 4865 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
> 
>    Device Boot      Start         End      Blocks   Id  System
> /dev/hda1   *           1         504     4048348+   7  HPFS/NTFS
> /dev/hda2             505        4865    35029732+   f  W95 Ext'd (LBA)
> /dev/hda5             505         578      594373+  83  Linux
> /dev/hda6             579         654      610438+  83  Linux
> /dev/hda7             655         906     2024158+  82  Linux swap / Solaris
> /dev/hda8             907        2805    15253686   83  Linux
> /dev/hda9            2806        3442     5116671    7  HPFS/NTFS
> /dev/hda10           3443        4864    11422183+   b  W95 FAT32
> [root@iSCSI init.d]#
> 
> when i configure the windows initiator it gives me the error messages as
> connection failed
> 
> i configured the initiator in windows to test the target from the link
> ttp://www.microsoft.com/downloads/details.aspx?FamilyID=12cb3c1a-15d6-4585-b385-befd1319f825&DisplayLang=en
> 
> plz help mefor the past one month i am try varoius verions of the
> target i am not able do it.
> what is the problem with my configuration
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by xPML, a groundbreaking scripting language
> that extends applications into web and mobile media. Attend the live webcast
> and join the prime developer group breaking into this new coding territory!
> http://sel.as-us.falkag.net/sel?cmd=k&kid0944&bid$1720&dat1642
> _______________________________________________
> Iscsitarget-devel mailing list
> Isc...@li...
> https://lists.sourceforge.net/lists/listinfo/iscsitarget-devel
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by xPML, a groundbreaking scripting language
> that extends applications into web and mobile media. Attend the live webcast
> and join the prime developer group breaking into this new coding territory!
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642
> _______________________________________________
> Iscsitarget-devel mailing list
> Isc...@li...
> https://lists.sourceforge.net/lists/listinfo/iscsitarget-devel