From: James P. <ja...@mo...> - 2005-12-20 17:45:45
|
As I've already reported to Vernon, works fine for me. Thanks James Pearson Vernon Mauery wrote: > James Pearson wrote: > >>OK ... please let me know if you get something to release. > > > Here is a patch for you to test out. It worked for me on my setup. It was made > against the latest ipmitool cvs code. > > --Vernon > > >>Vernon Mauery wrote: >> >> >>>James Pearson wrote: >>> >>> >>>>Sorry to ask again, but if you do have such a patch available, then I >>>>would really like to give it a go as I currently can't make decent use >>>>of SOL using ipmitool >>> >>> >>> >>>I am working on something, but don't have anything to release quite yet. >>>Unfortunately, I can't get SOL working at all right now. I was >>>working on this >>>very issue about 2 months ago and got side tracked. In the mean time, >>>someone >>>else on my team hijacked the machine I was working on and flashed the >>>BMC, >>>changed the settings, and in general wreaked havoc on my setup. Now I am >>>struggling to get SOL working at all. As soon as I do 'sol activate' >>>it says >>>'Info: SOL payload disabled'. >>> >>>--Vernon >>> >>> >>> >>>>Thanks >>>> >>>>James Pearson >>>> >>>>Vernon Mauery wrote: >>>> >>>> >>>> >>>>>James Pearson wrote: >>>>> >>>>> >>>>> >>>>>>I'm having problems with SOL connections disconnecting when using >>>>>>ipmitool to a Tyan M3291 SMDC on a S2891 motherboard i.e. >>>>>> >>>>>>% ipmitool -I lanplus -H test1 -U Admin sol activate >>>>>>[SOL Session operational. Use ~? for help] >>>>>> >>>>>>This works fine - but if I leave it sitting at the prompt for a short >>>>>>while (a couple of minutes) and then try to do anything - e.g. press >>>>>>return, I get: >>>>>> >>>>>>Error sending SOL data >>>>>>SOL session closed by BMC >>>>>> >>>>>>If I run something that continually writes to the screen (e.g. "top"), >>>>>>then it doesn't close the session. >>>>>> >>>>>>I'm using ipmitool from CVS (downloaded last week) >>>>>> >>>>>>Is this a known problem/issue? Is there anyway I can keep the (idle) >>>>>>connection open for longer? >>>>> >>>>> >>>>> >>>>> >>>>>We have found this to be the case with our servers too. The IPMI spec >>>>>says in >>>>>section 6.12.15 that it is okay to close an idle LAN session after 60 >>>>>seconds >>>>>(+-3 seconds). It also says that a remote console can optionally >>>>>use the >>>>>'Activate Session' command periodically to ensure that the session >>>>>does not get >>>>>dropped. We were planning on submitting a patch for this, but we >>>>>haven't gotten >>>>>around to it yet. :) >>>>> >>>>>--Vernon >>>>> >>>>> >>>>> >>>>> >>>>>>Thanks >>>>>> >>>>>>James Pearson >> >> >> >> > > |