From: Nicolas D. <nic...@ph...> - 2010-09-03 15:51:08
|
Good afternoon, I allow myself to still write to you about the problem below. May be somebody can help me or give me an answer? Thanks in advance. Best Regards Nicolas DLUBAK _____ De : Nicolas DLUBAK [mailto:nic...@ph...] Envoyé : mardi 31 août 2010 20:29 À : 'ipm...@li...' Objet : some problem with the argument "delete" on ipmitool Importance : Haute Good evening ipmitool-devel, I present myself I am Nicolas DLUBAK an administrator system and network for the company PHOTOBOX. At the moment I work on the project to monitor the status hardware on each server. In this project I use the soft ipmitool (ipmitool version 1.8.8) in the script. On this script I need to clean just a line on the event log below. Here is an example: [#####]# ipmitool -c -I lan -H ipaddress -U login -P password sel list 1,Event Logging Disabled #0x72,Log area reset/cleared,Asserted 2,Pre-Init Time-stamp,,Power Supply #0x74,Redundancy Lost 3,Pre-Init Time-stamp,,Power Supply #0x65,Failure detected,Asserted 4,Pre-Init Time-stamp,,Power Supply #0x65,Power Supply AC lost,Asserted And when I want to delete a line on this sel list it doesnt work at all. [#####]# ipmitool -c -I lan -H ipaddress -U login -P password sel delete 3 Unable to delete entry 3: Invalid command So of course I already looking for a solution by myself but I did not find anything on INTERNET and also with my best colleague. I will on top appreciate really your assistance because I cannot what make, and it is a very important project for me and it is also a big issue for infrastructure. Thanks again in advance for your future help. Best Regards Nicolas DLUBAK Administrateur Réseaux & Systèmes E-mail nic...@ph... |