Menu
▾
▴
Re: [Hamlib-developer] IC737 ?
|
From: Sid B. <sb...@bl...> - 2002-11-24 20:23:25
|
Some success to report."rigctl -Ccivaddr=0x3c -m 319 -vvvvvv" gave me the following results:- ------------------------------------------------------- rig:rig_open called Opened rig model 319, 'IC-735' Backend version: 0.2, Status: Alpha Rig command: f TX 6 bytes 0000 fe fe 3c e0 03 fd ..<... RX 6 characters 0000 fe fe 3c e0 03 fd ..<... RX 11 characters 0000 fe fe e0 3c 03 70 10 20 14 00 fd ...<.p. ... icom_get_freq: wrong frame len=5 get_freq: error = Command rejected by the rig Rig command: m TX 6 bytes 0000 fe fe 3c e0 04 fd ..<... RX 6 characters 0000 fe fe 3c e0 04 fd ..<... RX 8 characters 0000 fe fe e0 3c 04 01 01 fd ...<.... Mode: USB Passband: 2400 Rig command: E Memory#: 1 TX 7 bytes 0000 fe fe 3c e0 08 01 fd ..<.... RX 7 characters 0000 fe fe 3c e0 08 01 fd ..<.... RX 6 characters 0000 fe fe e0 3c fb fd ...<.. --------------------------------------------- I've tried most commands, but those are the ones that gave me other than "Feature Not Available". Specifying an IC756 did not work. 73....Sid. On Mon, 2002-11-18 at 22:35, Stephane Fillod wrote: > On Sat, Nov 16, 2002 at 02:59:03PM +0000, Sid Boyce wrote: > > I had been trying via grig, using IC735 and IC756, also under rigctl -m > > 300 (IC-DoItAll) and also rigctl -m 321 (IC737). It appears that if the > > rig isn't in the list (rigctl --list), it won't work. > > ------------------------------------------ > > # rigctl -Ccivaddr=0x3c > > Config parameter error: Feature not available > > try "rigctl -Ccivaddr=0x3c -m 326 -vvvvvv" > You should be able at least to exercise basic support. > > Let me know if you have trouble checking out the CVS version > (the autoconf/automake versions can be troublesome). > I can put a snapshot on the web site. > > 73's > Stephane -- Sid Boyce ... hamradio G3VBV ... Cessna/Warrior Pilot Linux only shop |