From: Heilpern, M. <mar...@au...> - 2004-12-16 20:03:13
|
I will soon be needing to control a few GPIOs from within a driver, and am wondering what the best way to go about this will be. I've seen the references towards GPIO access from within the /proc/gpio interface, but this won't cut it for a driver, interrupt context, etc. Is my problem something solved through better understanding of the implementation under Linux, or do I need to steer over to the PXA255 manual for this? Somewhat related - is there a low level NSSP driver for the pxa255 which I can leverage to access the device, or am I breaking new ground with that? ________________________________________________________ NOTE: The information in this message is intended for the personal and = confidential use of the designated recipient(s) named above. To the extent the = recipient(s) is/are bound by a non-disclosure agreement, or other agreement that contains an = obligation of confidentiality, with AuthenTec, then this message and/or any = attachments shall be considered confidential information and subject to the confidentiality = terms of that agreement. If the reader of this message is not the intended recipient = named above, you are notified that you have received this document in error, and any = review, dissemination, distribution or copying of this message is strictly prohibited. If you = have received this document in error, please delete the original message and notify the = sender immediately. Thank you. AuthenTec, Inc. http://www.authentec.com |