SV: [Gumstix-users] turned my stick into a doorstop

[Benny S. (webmail) <ben...@ma...>]

I did the same thing, but with my own build binary file so I thought there =
were a problem with that file. Yesterday I managed to get my own build =
JTAG and ODC Commander to execute the script from the Wiki and the 1.1.1 =
bootloader did actually start, but I did unfortunately not stop the =
bootloader before it tried to boot.
Unfortunately it's almost impossible for me to start the stix and let the =
Macraigor ODC Commander connect. I guess I used 3 houers where I got =
"internal" errors from the Commander which according to the helpfile newer =
should happen. I also got a log file which described errors internal in =
the program. It does also look like a have my old problem to have the stix =
power correctly up so that I can communicate with it over JTAG.

Until Craig has confirmed that the bin image is working I will not =
recommend that anyone try to update the u-boot unless they have a working =
JTAG.

Craig could you write the "md5sum" on the images you put on sourceforge so =
it's possible to verify that nothing bad has happened during download.

Best Regards
Benny

-----Oprindelig meddelelse-----
Fra: gum...@li...
Til: gum...@li... =
<gum...@li...>
Emne: [Gumstix-users] turned my stick into a doorstop
Dato: 28-07-2004 03:34:08

> Well, I followed the steps I mapped out in my previous
> post from last Friday and the stick is now dead.
>=20
> I had downloaded the 400MHz binary imae from
> sourceforge. One thing I didn't think about was
> whether this binary is for older gumstix boards or
> newer? I have an older one (waysmall), 400 MHz.
>=20
> Anyway, all appeared to go correctly per the list of
> commands I thought I needed to do: unprotect flash
> (though uboot said the first sector was 1 and not 0)
> erase flash, load binary, copy to flash, re-protect.
>=20
> Issue reset command, board is dead. Cycle power and
> board is dead. Oh well, looks like I'll need to get
> JTAG up and running...
>=20
> Craig, can you verify that the image on Sourceforge
> really works?
>=20
> Thanks, Jim
>=20
>=20
>=20
>=20
> __________________________________
> Do you Yahoo!?
> New and Improved Yahoo! Mail - 100MB free storage!
> http://promotions.yahoo.com/new_mail
>=20
>=20
> -------------------------------------------------------
> This SF.Net email is sponsored by BEA Weblogic Workshop
> FREE Java Enterprise J2EE developer tools!
> Get your free copy of BEA WebLogic Workshop 8.1 today.
> http://ads.osdn.com/?ad_id=3D4721&alloc_id=3D10040&op=3Dclick
> _______________________________________________
> gumstix-users mailing list
> gum...@li...
> https://lists.sourceforge.net/lists/listinfo/gumstix-users
>=20
>=20