From: Ash C. <ash...@gm...> - 2015-05-22 16:01:00
|
Hi Ricardo, Could you pastebin a boot log for the new image on this same board? Hopefully there will be a clue in the boot messages as to why the old image is able to bring up the libertas wifi but the new build fails to even list the interface. Cheers, --Ash On Fri, May 22, 2015 at 5:17 AM, Ricardo Martínez Monje <ric...@gm...> wrote: > Hi Ash, > > I have an old gumstix version, Octover 13th 2014, that works, at least I can > scan wifi networks... after doing a ifup... > > root@overo:~$ uname -a > Linux overo 3.5.7-custom #1 PREEMPT Tue May 27 06:05:04 PDT 2014 armv7l > GNU/Linux > > root@overo:~$ dmesg | grep libertas > [ 12.408203] libertas_sdio: Libertas SDIO driver > [ 12.518249] libertas_sdio: Copyright Pierre Ossman > [ 14.996246] libertas_sdio mmc1:0001:1: (unregistered net_device): > 00:19:88:3d:01:36, fw 9.70.20p0, cap 0x00000303 > [ 15.026885] libertas_sdio mmc1:0001:1: wlan0: Marvell WLAN 802.11 adapter > > root@overo:~$ ifup wlan0 > Successfully initialized wpa_supplicant > [ 261.051269] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready > udhcpc (v1.22.1) started > Sending discover... > Sending discover... > Sending discover... > No lease, failing > > root@overo:~$ ifconfig > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > > wlan0 Link encap:Ethernet HWaddr 00:19:88:3D:01:36 > UP BROADCAST MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > > root@overo:~$ iwlist wlan0 scanning > wlan0 Scan completed : > Cell 01 - Address: 50:67:F0:82:2A:91 > Channel:3 > Frequency:2.422 GHz (Channel 3) > Quality=27/70 Signal level=-83 dBm > Encryption key:on > ESSID:"NGFW-WLAN" > Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s > Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s > 36 Mb/s; 48 Mb/s; 54 Mb/s > Mode:Master > Extra:tsf=000000001a858095 > Extra: Last beacon: 906ms ago > IE: Unknown: 00094E4746572D574C414E > IE: Unknown: 010582848B962C > IE: Unknown: 030103 > IE: Unknown: 050C000300000000000000000000 > IE: Unknown: 2A0100 > IE: Unknown: 32080C1218243048606C > > > > > 2015-05-20 19:54 GMT+02:00 Ash Charles <ash...@gm...>: >> >> Hi Ricardo, >> >> That looks very much like neither wifi nor ethernet is coming up. Can >> you see any failures in the boot log? Is this board known good with a >> different image (e.g. the preflashed one)? >> >> --Ash >> >> On Mon, May 18, 2015 at 10:46 AM, rmartimo >> <ric...@gm...> wrote: >> > Hi Ash, >> > >> > Thanks for your time... >> > Here you have what I can see... any idea? >> > >> > root@overo:~# if config >> > lo Link encap:Local Loopback >> > inet addr:127.0.0.1 Mask:255.0.0.0 >> > UP LOOPBACK RUNNING MTU:65536 Metric:1 >> > RX packets:160 errors:0 dropped:0 overruns:0 frame:0 >> > TX packets:160 errors:0 dropped:0 overruns:0 carrier:0 >> > collisions:0 txqueuelen:0 >> > RX bytes:12160 (11.8 KiB) TX bytes:12160 (11.8 KiB) >> > >> > root@overo:~# iw wlan0 >> > nothing... >> > >> > root@overo:~# lsmod >> > Module Size Used by >> > cfg80211 403578 0 >> > nfc 59962 0 >> > rfkill 19728 2 nfc,cfg80211 >> > snd_soc_omap_twl4030 6881 0 >> > snd_soc_omap_mcbsp 18005 2 >> > snd_soc_omap 2783 1 snd_soc_omap_mcbsp >> > snd_pcm_dmaengine 5427 1 snd_soc_omap >> > snd_soc_twl4030 39475 1 >> > snd_soc_core 162921 4 >> > snd_soc_omap_twl4030,snd_soc_omap,snd_soc_omap_mcbsp,snd_soc_twl4030 >> > snd_compress 8708 1 snd_soc_core >> > snd_pcm 87733 5 >> > >> > snd_soc_core,snd_soc_omap,snd_soc_omap_mcbsp,snd_pcm_dmaengine,snd_soc_twl4030 >> > snd_timer 20245 1 snd_pcm >> > snd 61190 4 >> > snd_soc_core,snd_timer,snd_pcm,snd_compress >> > soundcore 7249 1 snd >> > >> > >> > >> > -- >> > View this message in context: >> > http://gumstix.8.x6.nabble.com/Overo-stops-at-Starting-Kernel-tp4969917p4969928.html >> > Sent from the Gumstix mailing list archive at Nabble.com. >> > >> > >> > ------------------------------------------------------------------------------ >> > One dashboard for servers and applications across Physical-Virtual-Cloud >> > Widest out-of-the-box monitoring support with 50+ applications >> > Performance metrics, stats and reports that give you Actionable Insights >> > Deep dive visibility with transaction tracing using APM Insight. >> > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y >> > _______________________________________________ >> > gumstix-users mailing list >> > gum...@li... >> > https://lists.sourceforge.net/lists/listinfo/gumstix-users >> >> >> ------------------------------------------------------------------------------ >> One dashboard for servers and applications across Physical-Virtual-Cloud >> Widest out-of-the-box monitoring support with 50+ applications >> Performance metrics, stats and reports that give you Actionable Insights >> Deep dive visibility with transaction tracing using APM Insight. >> http://ad.doubleclick.net/ddm/clk/290420510;117567292;y >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > ------------------------------------------------------------------------------ > One dashboard for servers and applications across Physical-Virtual-Cloud > Widest out-of-the-box monitoring support with 50+ applications > Performance metrics, stats and reports that give you Actionable Insights > Deep dive visibility with transaction tracing using APM Insight. > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > |