From: Timothy L. <tvl...@ut...> - 2015-04-24 03:20:14
|
▒tذb▒ U-Boot SPL 2014.10 (Mar 31 2015 - 16:43:01) SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! ecc unrecoverable error . . . ecc unrecoverable error U-Boot 2014.10 (Mar 31 2015 - 16:43:01) OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-200MHz, Max CPU Clock 1 Ghz Gumstix Overo board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0 *** Warning - bad CRC, using default environment Board revision: 1 Tranceiver detected on mmc2 No EEPROM on expansion board Die ID #2eba00029ff80000015a8b050701701a Net: smc911x-0 Error: smc911x-0 address not set. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt ** Unable to read file uEnv.txt ** reading uImage ** Unable to read file uImage ** 4767696 bytes read in 335 ms (13.6 MiB/s) 65848 bytes read in 45 ms (1.4 MiB/s) Booting with DT from mmc ... Kernel image @ 0x82000000 [ 0x000000 - 0x48bfd0 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffec000, end 8ffff137 ... OK Starting kernel ... |