From: Ainur B. <ain...@nu...> - 2013-11-07 10:12:09
|
Hello, Our laboratory ordered 15 sets of Gumstix Over Air with Palo35 ad Robovero extensions. 3 of them doesn't connect to Wi-Fi. When I run ifup wlan0 i get the following: root@overo:~# ifup wlan0 ADDRCONF(NETDEV_UP): wlan0: link is not ready ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Internet Systems Consortium DHCP Client V3.1.2p1 Copyright 2004-2009 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ Listening on LPF/wlan0/00:19:88:42:88:41 Sending on LPF/wlan0/00:19:88:42:88:41 Sending on Socket/fallback DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPOFFER from 10.3.1.2 DHCPREQUEST on wlan0 to 255.255.255.255 port 67 DHCPACK from 10.3.1.2 bound to 10.3.12.96 -- renewal in 84340 seconds. then pinging to google gives me this: PING www.google.com (89.218.72.93) 56(84) bytes of data. >From 10.3.1.2 icmp_seq=7 Packet filtered >From 10.3.1.2 icmp_seq=16 Packet filtered >From 10.3.1.2 icmp_seq=50 Packet filtered -- Best wishes, Ainur Begalinova Laboratory Assistant Robotics Department School of Science and Technology Nazarbayev University Research and innovation Systems +7 7172 706278 |