From: Mark R. <blu...@gm...> - 2012-08-21 03:01:04
|
Hi to all-gumstix-users, Would like to check if anyone manage to use McBSP3 on gpio 17 (SPI3_CLK), gpio 14 (SPI3_MOSI) and gpio 21 (SPI3_CS1) pin? I have changed the pin mux all the 3 pins on the u-boot but I could only see the gpio 17 (spi3_clk) working will the other 2 pins in the low state. Any idea what stuff needs to be done besides the u-boot? Mark Russell On 8/19/12, Nicola <pa...@li...> wrote: > Thank you Jumpnowdev.... I completely missed it searching the MbSP 1. > Truly, for the application that I must implement I should need more than > one > MbSP for several channel > fast acquisition! What a pity that gumstixs haven't a third socked with > plus > connections! > ( this have the explicit intetion to give a suggestion to the gumstix team > for developing a new gumstix version :-) ! > Nicola > > > > -- > View this message in context: > http://gumstix.8.n6.nabble.com/McBSP-where-the-pinout-tp4965156p4965158.html > Sent from the Gumstix mailing list archive at Nabble.com. > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > |