From: Akram H. <ak...@aq...> - 2012-07-24 05:26:58
|
Whoa, Disregard previous comment about kernel version. I haven’t slept in over 24 hours, I should read more carefully. *From:* Akram Hameed [mailto:ak...@aq...] *Sent:* Tuesday, 24 July 2012 3:17 PM *To:* General mailing list for gumstix users. *Subject:* RE: [Gumstix-users] Another failure to boot Howdy Nick, Glad to see you’ve solved your problem. Are you building things using gumstix instructions? Curiosity compels me to ask. I’d build newer versions of x-loader and u-boot if I were you. Lots of things fixed since the versions you are running. Not sure about kernel – that looks relatively ancient, surely you are not running something that old...? *From:* Nick Wernicke [mailto:nic...@gm...] *Sent:* Tuesday, 24 July 2012 1:38 PM *To:* General mailing list for gumstix users. *Subject:* Re: [Gumstix-users] Another failure to boot Thank you very much! I totally failed initially by typing in ttyZERO2, so I figured that was wrong and was very confused. The correct steps are: 1. setenv console ttyO2,115200n8 (where the O is a capital o as in output, not zero) 2. saveenv 3. win Nick On Mon, Jul 23, 2012 at 7:59 PM, Ash Charles <ash...@gm...> wrote: For kernel version 2.6.35+, the default console is 'ttyO2' not 'ttyS2' i.e. setenv console ttyO2,115200n8 Your system may be booting just fine but the bootlog is getting piped to the wrong (non-existant) serial port. --Ash On Mon, Jul 23, 2012 at 6:08 PM, Nick Wernicke <nic...@gm...> wrote: > Hello all, I have successfully built several versions of kernels using the > OE environment from Angstrom. > http://www.angstrom-distribution.org/building-angstrom. As far as I know, > they work great and include exactly the modules I want, and none of the > modules I don't, but neither the Overo FE-storm nor the Overo Water will > boot on a Tobi :(... As far as I can tell, this is a common problem, but I > don't know how to begin troubleshooting it- and that is my question. How do > I troubleshoot failure-to-boot problems? Is there a guide on that? > > It looks like a lot of people have a problem where their console spits out > on the wrong ttyS* port, I set mine to ttyS2. > Overo # echo $bootargs > console=ttyS2,115200n8 > > This is the result: > > Texas Instruments X-Loader 1.4.4ss (Jan 28 2011 - 20:54:56) > OMAP36XX/37XX-GP ES2.1 > Board revision: 1 > Reading boot sector > Loading u-boot.bin from mmc > > > U-Boot 2010.12 (Jan 31 2011 - 08:33:29) > > OMAP36XX/37XX-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz > Gumstix Overo board + LPDDR/NAND > I2C: ready > DRAM: 512 MiB > NAND: 512 MiB > MMC: OMAP SD/MMC: 0 > In: serial > Out: serial > Err: serial > Board revision: 1 > Tranceiver detected on mmc2 > No EEPROM on expansion board > Die ID #414a00229ff80000016858020901e022 > Net: smc911x-0 > Hit any key to stop autoboot: 0 > reading boot.scr > > ** Unable to read "boot.scr" from mmc 0:1 ** > reading uImage > > 4537976 bytes read > Booting from mmc ... > ## Booting kernel from Legacy Image at 82000000 ... > Image Name: Angstrom/3.2.19/overo > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 4537912 Bytes = 4.3 MiB > Load Address: 80008000 > Entry Point: 80008000 > Verifying Checksum ... OK > Loading Kernel Image ... OK > OK > > Starting kernel ... > > Uncompressing Linux... done, booting the kernel. > > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ gumstix-users mailing list gum...@li... https://lists.sourceforge.net/lists/listinfo/gumstix-users |