From: Steffen S. <sc...@cs...> - 2012-06-04 15:23:43
|
Hey Tyler, thanks for the answer! I've already stumbled upon the Eagle libraries. But as I understand it, the alignment is not purely a layout issue, but more a production/soldering challenge. As we would most porbably end up doing that by hand, I reckon it would be easier if I could get around that. Will the 3 pins on J7 be enough to power the Overo? Thanks! Steffen On 06/04/2012 05:12 PM, Tyler Frelyt wrote: > I don't think the alignment is that difficult of an issue, but if > you're really worried about it, why don't you download the free > version of eagle PCB and then get the gumstix eagle libraries here: > > http://pubs.gumstix.com/boards/COMS/ > > Those include an overo part which is both J1 and J4 properly spaced > and the alignment holes that will make your connectors mount > properly. You can only make 4" x 6" two layer boards with the free > version of Eagle, but for as little as you want to pin out that > shouldn't be an issue. > > > On Mon, Jun 4, 2012 at 1:46 AM, Steffen Schuetz <sc...@cs... > <mailto:sc...@cs...>> wrote: > > Hi, > as I already mentioned in another thread, I would like to use the GPMC > to communicate with an FPGA. To see if the setup in the gumstix is > producing the desired output, I would like to build a minimal > expansion > board that allows me to access the GPMC signals. Therefore I would > like > to know if it is possible to only use J4? > I would connect > > Pin 1 and 2 to VCC > Pin 3 and 33 to GND > > and route out the GPMC related Pins to connect to the > oscilloscope. Will > that be enough to get the overo up and running and communicate to > it via > the wireless interface? Or are any signals of J1 needed? By just using > one I could avoid the alignment issue... > > Thanks in advance! > Steffen > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. > Discussions > will include endpoint security, mobile security and the latest in > malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > gumstix-users mailing list > gum...@li... > <mailto:gum...@li...> > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > > > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-user |