Re: [Gumstix-users] Pinto-TH woes

[Neil M. <ne...@gu...>]

Hi Savas,

On Fri, Feb 10, 2012 at 5:55 AM, Savas Piperidis <sa...@dp...> wrote:
> Dear Roger,
> It seems that I confront the same problem, as you can see from my recent
> post:
> http://gumstix.8.n6.nabble.com/Pinto-TH-and-Thunbo-board-problems-tt4376291.html
> http://gumstix.8.n6.nabble.com/Pinto-TH-and-Thunbo-board-problems-tt4376291.html
>
> Have you find any solution to the problem with the Pinto TH board? Was it a
> faulty one or was it something else?
> Does the Thumbo board works with the Overo Fire and the wireless, If you
> connect the power supply (5V/1A) to pin 48 V_BATT?
> Best Regards,
> Savas

It might be safer (i.e. less prone to error) to power from the V_BATT
and GND connections at the end opposite the USB OTG connector.
Otherwise, yes, you should be able to power from pins 48 (V_BATT) and
9 (gnd). Do you have a console port set up?

 http://www.sakoman.com/OMAP/how-to-add-a-serial-console-to-overo-thumbopinto.html

-
Neil