From: ScottEllis <sco...@gm...> - 2011-06-18 15:27:27
|
Steve, I just ran the following tests with your MLO and U-Boot. It's hanging on a Fire COM. Same Tobi board and microSD card for all tests. On a Tide, I get this ============== Texas Instruments X-Loader 1.4.4ss (Jun 6 2011 - 20:31:30) No NAND detected OMAP3530-GP ES3.1 Board revision: 1 Reading boot sector Loading u-boot.bin from mmc U-Boot 2010.12 (Jun 06 2011 - 20:32:44) OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz Gumstix Overo board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Board revision: 1 Direct connection on mmc2 No EEPROM on expansion board Die ID #6d1800040000000004039f2203011014 Net: smc911x-0 Hit any key to stop autoboot: 0 ============== On a Water I get this ============== Texas Instruments X-Loader 1.4.4ss (Jun 6 2011 - 20:31:30) OMAP3530-GP ES3.1 Board revision: 0 Reading boot sector Loading u-boot.bin from mmc U-Boot 2010.12 (Jun 06 2011 - 20:32:44) OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz Gumstix Overo board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 256 MiB MMC: OMAP SD/MMC: 0 In: serial Out: serial Err: serial Board revision: 0 Direct connection on mmc2 No EEPROM on expansion board Die ID #193e00040000000004037f680c022007 Net: smc911x-0 Hit any key to stop autoboot: 0 ============== On a Fire, the boot hangs detecting the NIC ============== Texas Instruments X-Loader 1.4.4ss (Jun 6 2011 - 20:31:30) OMAP3530-GP ES3.1 Board revision: 0 Reading boot sector Loading u-boot.bin from mmc U-Boot 2010.12 (Jun 06 2011 - 20:32:44) OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz Gumstix Overo board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 256 MiB MMC: OMAP SD/MMC: 0 In: serial Out: serial Err: serial Board revision: 0 Tranceiver detected on mmc2 No EEPROM on expansion board Die ID #2cf000240000000004035c1402016016 <hang waited over a minute, several tries> ============== If I switch back to using the u-boot-omap3/MLO from the gumstix-oe tree HEAD and the same Fire/Tobi combination ============== Texas Instruments X-Loader 1.4.4ss (Jun 13 2011 - 19:01:37) OMAP3530-GP ES3.1 Board revision: 0 Reading boot sector Loading u-boot.bin from mmc U-Boot 2010.09 (Jun 10 2011 - 16:35:07) OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz Gumstix Overo board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 256 MiB In: serial Out: serial Err: serial Board revision: 0 Tranceiver detected on mmc2 No EEPROM on expansion board Die ID #2cf000240000000004035c1402016016 Net: smc911x-0 Hit any key to stop autoboot: 0 ============== Though the NIC check takes several seconds where with the other COMS any u-boot, the NIC check is very fast. I currently only have one Fire COM to test with. -- View this message in context: http://old.nabble.com/Still-Have-ifconfig-problem-%3A%28-tp31861366p31875681.html Sent from the Gumstix mailing list archive at Nabble.com. |