Re: [Gumstix-users] U-Boot not being loaded from MMC card

[Victhor <vic...@gm...>]

I've tried X-Loader versions from
http://www.sakoman.com/feeds/omap3/glibc/images/overo/ until about Jan
02 2010, and none of them load the u-boot.bin from the MMC. I can't
reset any u-boot parameters as, I've said before, my u-boot is dead.
> On 18/01/2011 11:03 AM, Victhor wrote:
> > My board got a bad u-boot so I decided to load it via MMC. I have MLO,
> > u-boot.bin and uImage on the MMC card. MLO is being loaded from the
> > MMC(the X-Loader version is newer than the one on NAND), u-boot is not
> > being loaded from it. Because my NAND u-boot is bad, my board is
> > unbootable. This is what I get:
> > Texas Instruments X-Loader 1.4.4ss (Nov 15 2010 - 08:42:50)
> > OMAP3530-GP ES3.1
> > Board revision: 0
> > Reading boot sector
> > Loading u-boot.bin from nand
> > ECC Failed, page 0x00080000
> > [snip]
> > What is the problem?
> >
> Try an older x-loader
> 
> sounds related to the problem Stephan was having
> 
> see thread " new overo air does not come up while sd card inserted"
> 
> Fix is to erase the nand first before trying to boot from the sd card
> 
> nand erase 240000 20000
> reset
> 
> see Steve's posts in that thread for the reason
> 
> 
> 
> 
> Alex
> 
> --
> UTS CRICOS Provider Code:  00099F
> DISCLAIMER: This email message and any accompanying attachments may contain
> confidential information.  If you are not the intended recipient, do not
> read, use, disseminate, distribute or copy this message or attachments.  If
> you have received this message in error, please notify the sender
> immediately and delete this message. Any views expressed in this message
> are those of the individual sender, except where the sender expressly, and
> with authority, states them to be the views the University of Technology,
> Sydney. Before opening any attachments, please check them for viruses and
> defects.
> 
> ------------------------------------------------------------------------------
> Protect Your Site and Customers from Malware Attacks
> Learn about various malware tactics and how to avoid them. Understand 
> malware threats, the impact they can have on your business, and how you 
> can protect your company and customers by using code signing.
> http://p.sf.net/sfu/oracle-sfdevnl
> _______________________________________________
> gumstix-users mailing list
> gum...@li...
> https://lists.sourceforge.net/lists/listinfo/gumstix-users