From: Bob C. <bco...@ve...> - 2011-01-10 19:48:51
|
http://en.wikipedia.org/wiki/BogoMips BogoMIPS is a calculated value, see the Wikipedia article. It does not correspond to the processor rating in megahertz. Bob Cochran On 01/10/2011 02:39 PM, Tom Calef wrote: > > I set my boot arguments so that mpurate=600 (I think this is the max > spec reading all the threads on the overo fe), but when I check the > speed, I get the following > > root@omap3evm:~# cat /proc/cpuinfo > > Processor : ARMv7 Processor rev 3 (v7l) > > *BogoMIPS : 499.92* > > Features : swp half thumb fastmult vfp edsp thumbee neon > vfpv3 > > CPU implementer : 0x41 > > CPU architecture: 7 > > CPU variant : 0x1 > > CPU part : 0xc08 > > CPU revision : 3 > > Hardware : Gumstix Overo > > Revision : 0020 > > Serial : 0000000000000000 > > Can someone help get me to 600MIPS? > > Thanks! > > Tom > > BOOTARGS AS FOLLOWS > > Overo # printenv > > bootcmd=if mmc init; then if run loadbootscript; then run bootscript; > else if run loaduimage; then run mmcboot; else run nandboot; fi; fi; > else run nandboot; fi > > bootdelay=5 > > baudrate=115200 > > loadaddr=0x82000000 > > console=ttyS2,115200n8 > > vram=12M > > dvimode=1024x768MR-16@60 > > defaultdisplay=dvi > > mmcroot=/dev/mmcblk0p2 rw > > mmcrootfstype=ext3 rootwait > > nandroot=/dev/mtdblock4 rw > > nandrootfstype=jffs2 > > loadbootscript=fatload mmc 0 ${loadaddr} boot.scr > > bootscript=echo Running bootscript from mmc ...; source ${loadaddr} > > loaduimage=fatload mmc 0 ${loadaddr} uImage > > mmcboot=echo Booting from mmc ...; run mmcargs; bootm ${loadaddr} > > nandboot=echo Booting from nand ...; run nandargs; nand read > ${loadaddr} 280000 400000; bootm ${loadaddr} > > dieid#=1e4e00040000000004037f680d016010 > > ethact=smc911x-0 > > nandargs=setenv bootargs console=${console} mpurate=${mpurate} > vram=${vram} mem=${sysram} omapfb.mode=dvi:${dvimode} omapfb.debug=y > omapdss.def_disp=${defaultdisplay} root=${nandroot} > rootfstype=${nandrootfstype} > > filesize=2D5C5C > > fileaddr=82000000 > > ipaddr=10.1.55.122 > > serverip=10.1.55.107 > > netmask=255.255.255.0 > > hostname=overo > > gatewayip=10.1.55.1 > > ip=10.1.55.122:10.1.55.107:10.1.55.1:255.255.255.0:overo:eth0:none > > nfsroot=/tcalef/workdir/filesys > > nfsargs=setenv bootargs console=${console} root=/dev/nfs > rootfstype=nfs ip=${ip} nfsroot=${nfsroot} rootwait > > loadnfskernel=tftp ${loadaddr} uImage > > stdin=serial > > stdout=serial > > stderr=serial > > mpurate=600 > > sysram=100M > > mmcargs=setenv bootargs console=ttyS2,115200n8 mpurate=600 vram=12M > mem=100M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y > omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait > > > ------------------------------------------------------------------------------ > Gaining the trust of online customers is vital for the success of any company > that requires sensitive data to be transmitted over the Web. Learn how to > best implement a security strategy that keeps consumers' information secure > and instills the confidence they need to proceed with transactions. > http://p.sf.net/sfu/oracle-sfdevnl > > > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users |