From: jkoenig1987 <jon...@gm...> - 2011-01-07 20:34:31
|
Hey all, has anyone had any success with reading the 3D accelerometer on the Gallop43? I was trying to run the bash script from http://old.nabble.com/3D-Accelerometer-on-Palo35-advice--td27933777.html, and even though the schematic shows the same accelerometer connections for the Palo35 and Gallop43 boards, I get the error below: root@overo:/# i2cget -y 3 0x1d 0x29 b i2c_omap i2c_omap.3: controller timed out Error: Read failed Running i2cdetect seems to suggest that there's something wrong with the entire bus, not just the accelerometer: root@overo:/# i2cdetect -y -r 1 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- UU UU UU UU -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- root@overo:/# i2cdetect -y -r 3 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: i2c_omap i2c_omap.3: controller timed out -- i2c_omap i2c_omap.3: controller timed out -- i2c_omap i2c_omap.3: controller timed out -- i2c_omap i2c_omap.3: controller timed out ... similar error for all addresses ... The setup we're currently running is Overo Tide - Gallop43 - LCD, with the most recent pre-built Palmtop image from http://www.sakoman.com/feeds/omap3/glibc/images/overo/201011150741/. I've also tried the Console image and the pre-built factory image with the same results. Any thoughts on what to try next? Thanks, Jon Koenig -- View this message in context: http://old.nabble.com/3D-accelerometer-on-Gallop43-tp30617484p30617484.html Sent from the Gumstix mailing list archive at Nabble.com. |