From: Bob C. <bco...@ve...> - 2010-12-16 01:58:58
|
I just now got two new microSDHC cards to assist me in my continued playing with my Overo FE. I want to preserve the current SD card which has a known-good prebuilt image on it and which boots. The first new SD card will be dedicated to updating my X-loader. Bob On 12/14/2010 06:44 PM, Fox, Trevor wrote: > Okay, I figured out the problem with the RAM recognizing only 128 MB. > I guess I didn't update both the uboot and MLO in sync to the NAND. > I have no idea how to do this, it sounds like it wouldn't be easy, so I > just loaded the desktop image onto the non-boot partition of the flash > card, which has the synced uboot and MLO files on the boot partition. > Shoved the card into the slot, and now the thing is recognizing its full > 256 MB. > No touchcreen functionality, tho, and the screen seems to shut off after > a few minutes, so it's still gonna be RMAd > > Trevor > > -----Original Message----- > From: Fox, Trevor [mailto:Trevor.Fox@QinetiQ-NA.com] > Sent: Tuesday, December 14, 2010 11:50 AM > To: General mailing list for gumstix users. > Subject: Re: [Gumstix-users] MLO - uboot check? > > Okay, thanks Scott. > I will go and check these now. > > Trevor > > -----Original Message----- > From: ScottEllis [mailto:sco...@gm...] > Sent: Tuesday, December 14, 2010 11:37 AM > To: gum...@li... > Subject: Re: [Gumstix-users] MLO - uboot check? > > > MLO and X-Loader are the same thing. > > > Fox, Trevor wrote: >> I don't see an MLO version on there. Where do I get the MLO version? >> (part of my original question) >> >> >> -----Original Message----- >> From: ScottEllis [mailto:sco...@gm...] >> Sent: Tuesday, December 14, 2010 11:19 AM >> To: gum...@li... >> Subject: Re: [Gumstix-users] MLO - uboot check? >> >> >> You can probably trust Steve Sakoman's advice. Google him ;-) >> >> For reference, here is a dump from an overo in front of me (a Tide, no >> nand >> but same x-load/MLO as the other overos) >> >> ... >> Texas Instruments X-Loader 1.4.4ss (Dec 1 2010 - 16:01:55) >> No NAND detected >> OMAP3530-GP ES3.1 >> Board revision: 1 >> Reading boot sector >> Loading u-boot.bin from mmc >> >> U-Boot 2010.09 (Dec 01 2010 - 15:32:16) >> ... >> >> >> Fox, Trevor wrote: >>> Does anybody know how to check if the MLO and u-boot are a matched >> set? >>> My board is saying there's only 128MB of DRAM and I want to verify if >>> this is a hardware or a firmware issue, and I've been told that this >>> >>> MLO and u-boot need to be matched. >>> >>> Ideas? >>> >>> >>> >>> Trevor >>> >>> >>> >>> >>> > ------------------------------------------------------------------------ >> ------ >>> Lotusphere 2011 >>> Register now for Lotusphere 2011 and learn how >>> to connect the dots, take your collaborative environment >>> to the next level, and enter the era of Social Business. >>> http://p.sf.net/sfu/lotusphere-d2d >>> _______________________________________________ >>> gumstix-users mailing list >>> gum...@li... >>> https://lists.sourceforge.net/lists/listinfo/gumstix-users >>> >>> >> -- >> View this message in context: >> http://old.nabble.com/MLO---uboot-check--tp30457806p30457918.html >> Sent from the Gumstix mailing list archive at Nabble.com. >> >> >> > ------------------------------------------------------------------------ >> ------ >> Lotusphere 2011 >> Register now for Lotusphere 2011 and learn how >> to connect the dots, take your collaborative environment >> to the next level, and enter the era of Social Business. >> http://p.sf.net/sfu/lotusphere-d2d >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users >> >> > ------------------------------------------------------------------------ > ------ >> Lotusphere 2011 >> Register now for Lotusphere 2011 and learn how >> to connect the dots, take your collaborative environment >> to the next level, and enter the era of Social Business. >> http://p.sf.net/sfu/lotusphere-d2d >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users >> >> |