From: Thomas E. <tho...@gm...> - 2010-09-09 20:13:07
|
Try using pinit and see what that gives. On Thu, Sep 9, 2010 at 3:00 PM, arm_555 <ar...@pe...> wrote: > > Hi, > > I have a Verdex Pro XL6P COM and here is the partition for the 8GB micro > sd card I have: > > Command (m for help): p > > Disk /dev/sdb: 7973 MB, 7973371904 bytes > 41 heads, 40 sectors/track, 9495 cylinders > Units = cylinders of 1640 * 512 = 839680 bytes > Sector size (logical/physical): 512 bytes / 512 bytes > I/O size (minimum/optimal): 512 bytes / 512 bytes > Disk identifier: 0x1b9515b8 > > Device Boot Start End Blocks Id System > /dev/sdb1 * 1 51 41800 6 FAT16 > /dev/sdb2 52 9495 7744080 83 Linux > > > > > I follow this page to make the bootable micro sd card > ( > http://www.gumstix.net/User-How-To-s/view/User-How-To-s/Booting-from-microSD/SD/MMC/110.html > ) > > I got gumstix-factory.script from .../mm-root. I put gumstix-factory.script > & uImage-2.6.21-r1-gumstix-custom-verdex.bin as uImage in /media/FAT & > > Angstrom-gumstix-basic-image-glibc-ipk-2007.9-test-20090212-gumstix-custom-verdex.rootfs.tar.gz > in /media/card (2nd partition) > > > > > > When I boot up I get this message: > > Flash: 32 MB > fault environment > > top autoboot: 0 > ion Cache is ON > ## Booting image at a2000000 ... > Image Name: Angstrom/2.6.21/gumstix-custom-v > Load Address: a0008000x Kernel Image (uncompress > Entry Point: a00OK > > Starting kernel ... > > > > > I also tried GUM> mmcinit it says No MMC card found > > > > > > > What do you think I did wrong? How can I make my Verdex boot up from > micro SD? > > Thank you, > > Arm > > > > -- > View this message in context: > http://old.nabble.com/Verdex-8GB-Micros-SD-not-booting-up-tp29670412p29670412.html > Sent from the Gumstix mailing list archive at Nabble.com. > > > > ------------------------------------------------------------------------------ > This SF.net Dev2Dev email is sponsored by: > > Show off your parallel programming skills. > Enter the Intel(R) Threading Challenge 2010. > http://p.sf.net/sfu/intel-thread-sfd > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > -- Thomas Epperson Build a man a fire, and he'll be warm for a day. Set a man on fire, and he'll be warm for the rest of his life. - Terry Pratchett. |