From: Sean R. <rei...@gm...> - 2010-07-22 19:03:49
|
I'm RMAing mine now, getting no joy trying different builds and its never lit up at all. As far as I can tell its just not working, good luck, Sean On Thu, Jul 22, 2010 at 5:05 PM, Vishwanath I Heddoori < vis...@gm...> wrote: > Thanks for the reply, > > I remember it was powered up for the first time, though the screen did not > show anything meaningful, I did see some white lines which indicated that it > was powering up.But now it does not even do that. > > Is it possible that screen has got damaged or something like that? > > > > On Thu, Jul 22, 2010 at 4:48 PM, Sean Reilly <rei...@gm...> wrote: > >> Hi Vishwanath, >> your problem sounds like it may be similar to the >> one I'm having. Basically the screen stays dark and the device boots up and >> can be accessed by kermit over the USB ? >> I'm not even sure what the correct behaviour is, whether the lcd screen >> switches on normally when the overo is powered on, or if it has to be >> explicitly switched on by the device. Perhaps somebody who has a working LCD >> might tell us ? >> >> regards, >> >> Sean >> >> On Thu, Jul 22, 2010 at 4:39 PM, Vishwanath I Heddoori < >> vis...@gm...> wrote: >> >>> Hi All, >>> >>> I am trying to connect lcd43 with Chestnut43 board and use it, I am not >>> able to do anything with this. >>> I am using the following commands to set the environment for lcd43 at the >>> boot time >>> >>> setenv defaultdisplay lcd43 >>> saveenv >>> reset >>> >>> While booting I get these messages stating that I detected the screen >>> ads7846 spi1.0: touchscreen, irq 274 >>> input: ADS7846 Touchscreen as >>> /devices/platform/omap2_mcspi.1/spi1.0/input/input0 >>> >>> However, the screen does not show up anything. It does not even power up. >>> Has anyone faced this problem before.? >>> >>> -- >>> Sincerely, >>> Vishwanath I Heddoori >>> >>> >>> >>> ------------------------------------------------------------------------------ >>> This SF.net email is sponsored by Sprint >>> What will you do first with EVO, the first 4G phone? >>> Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first >>> _______________________________________________ >>> gumstix-users mailing list >>> gum...@li... >>> https://lists.sourceforge.net/lists/listinfo/gumstix-users >>> >>> >> >> >> ------------------------------------------------------------------------------ >> This SF.net email is sponsored by Sprint >> What will you do first with EVO, the first 4G phone? >> Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users >> >> > > > -- > Sincerely, > Vishwanath I Heddoori > > > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Sprint > What will you do first with EVO, the first 4G phone? > Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > |