From: vwyodapink <vwy...@gm...> - 2010-06-18 04:49:54
|
I would try taking the modules required for networking and putting them on the SD card while it is in the build machine. Or you could also try sending the files through kermit. That would be my only two guess since it appears not be on there. You could also just add the missing networking from the console image recipe and try building your own or take off all the X11 from the desktop image and build that. The only reason I am using the desktop right now is so I can get somewhere with my overo fire until I can get my image to build properly for my use. Hope that helps get you somewhere cause I wouldnt know what else to try past what i suggested without trying a different console image thats prebuilt or getting your own to build or use the desktop for now. I am sure someone else will chime in at some point if theres better or more things to try :) Nathaniel Delp wrote: > > Both ipconfig and iwconfig give an error to the effect of "command not > found" > > > > On Jun 18, 2010, at 12:27 AM, vwyodapink wrote: > >> >> or if you give me some more info I can try and help you figure it >> out. What >> does iwconfig give you ? Have you edited the interfaces file? >> >> >> >> vwyodapink wrote: >>> >>> The desktop version is Angstrom as well. What overo do you have is >>> it on >>> board wifi? Have you tried bringing down the interface manually and >>> then >>> enabling it manually? Or if its the ethernet I would try the same >>> thing >>> though I dont have a ethernet port so I have no experience with it. >>> >>> >>> >>> Nathaniel Delp wrote: >>>> >>>> The console images appear to be build using Angstrom. >>>> >>>> However there is no network support. >>>> >>>> >>>> On Jun 18, 2010, at 12:00 AM, vwyodapink wrote: >>>> >>>>> >>>>> I dont know about console, but for the the jun 15th desktop >>>>> version is >>>>> working more than good enough for me so far. I can use it as a >>>>> console or >>>>> desktop with no issues so far. Though if I connect through the >>>>> console port >>>>> the network does not auto connect. I have to put it down and >>>>> connect >>>>> manually. I so far have been able to get decent results now with >>>>> the >>>>> overo >>>>> fire onboard and now with a usb alfa. >>>>> >>>>>> From my understanding they are all build specific but do not take >>>>>> that as >>>>> correct. But for me I have had the best results using everything as >>>>> it was >>>>> built for the image I am trying to use. >>>>> >>>>> >>>>> Nathaniel Delp wrote: >>>>>> >>>>>> Can someone tell me the last Overo console image that is known to >>>>>> work? >>>>>> >>>>>> >>>>>> I have followed the instructions to install on microSD card.... >>>>>> however my only sucess was to use the Overo boot files with >>>>>> Angstom >>>>>> image. This resulted in no networking. >>>>>> >>>>>> So I tried to use the known working boot loader files with the >>>>>> Overo >>>>>> console images from gumstix.org. No luck in booting so far. >>>>>> >>>>>> >>>>>> Are the boot loader files specific to the build or are they >>>>>> general? >>>>>> Perhaps the Angstrom boot loader files I have won't work on >>>>>> anything >>>>>> but the Angstrom version they were compiled for?? >>>>>> >>>>>> >>>>>> Thanks >>>>>> >>>>>> Nate >>>>>> >>>>>> ------------------------------------------------------------------------------ >>>>>> ThinkGeek and WIRED's GeekDad team up for the Ultimate >>>>>> GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the >>>>>> lucky parental unit. See the prize list and enter to win: >>>>>> http://p.sf.net/sfu/thinkgeek-promo >>>>>> _______________________________________________ >>>>>> gumstix-users mailing list >>>>>> gum...@li... >>>>>> https://lists.sourceforge.net/lists/listinfo/gumstix-users >>>>>> >>>>>> >>>>> >>>>> >>>>> ----- >>>>> Just a beginner trying to learn his way around. >>>>> -- >>>>> View this message in context: >>>>> http://old.nabble.com/Overo-Images-not-working-tp28922019p28922090.html >>>>> Sent from the Gumstix mailing list archive at Nabble.com. >>>>> >>>>> >>>>> ------------------------------------------------------------------------------ >>>>> ThinkGeek and WIRED's GeekDad team up for the Ultimate >>>>> GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the >>>>> lucky parental unit. See the prize list and enter to win: >>>>> http://p.sf.net/sfu/thinkgeek-promo >>>>> _______________________________________________ >>>>> gumstix-users mailing list >>>>> gum...@li... >>>>> https://lists.sourceforge.net/lists/listinfo/gumstix-users >>>> >>>> >>>> ------------------------------------------------------------------------------ >>>> ThinkGeek and WIRED's GeekDad team up for the Ultimate >>>> GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the >>>> lucky parental unit. See the prize list and enter to win: >>>> http://p.sf.net/sfu/thinkgeek-promo >>>> _______________________________________________ >>>> gumstix-users mailing list >>>> gum...@li... >>>> https://lists.sourceforge.net/lists/listinfo/gumstix-users >>>> >>>> >>> >>> >> >> >> ----- >> Just a beginner trying to learn his way around. >> -- >> View this message in context: >> http://old.nabble.com/Overo-Images-not-working-tp28922019p28922208.html >> Sent from the Gumstix mailing list archive at Nabble.com. >> >> >> ------------------------------------------------------------------------------ >> ThinkGeek and WIRED's GeekDad team up for the Ultimate >> GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the >> lucky parental unit. See the prize list and enter to win: >> http://p.sf.net/sfu/thinkgeek-promo >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > ------------------------------------------------------------------------------ > ThinkGeek and WIRED's GeekDad team up for the Ultimate > GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the > lucky parental unit. See the prize list and enter to win: > http://p.sf.net/sfu/thinkgeek-promo > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > ----- Just a beginner trying to learn his way around. -- View this message in context: http://old.nabble.com/Overo-Images-not-working-tp28922019p28922293.html Sent from the Gumstix mailing list archive at Nabble.com. |