From: vwyodapink <vwy...@gm...> - 2010-06-04 21:04:59
|
Have you tried it a few times yet and are getting the same results? It took me a few trys to get the card done correctly I was not getting errors like that but having other issues during boot and noticed I was not doing the o option in the beginning and after making sure I did that on the next try solved my issues and I could get a good boot from the sd card. AJ ONeal wrote: > > I've just followed the instructions here: > http://www.gumstix.net/Setup-and-Programming/view/Overo-Setup-and-Programming/Creating-a-bootable-microSD-card/111.html > > But the boot never finishes, it has a bunch of this mess mixed in with the > kernel messages and then it restarts > > end_request: I/O error, dev mmcblk0, sector 1657403 > mmcblk0: error -110 transferring data, sector 1657404, nr 9, card status > 0x80900 > > I'm assuming this is just a bad card, not a common issue? > > ------------------------------------------------------------------------------ > ThinkGeek and WIRED's GeekDad team up for the Ultimate > GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the > lucky parental unit. See the prize list and enter to win: > http://p.sf.net/sfu/thinkgeek-promo > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > -- View this message in context: http://old.nabble.com/Overo-SD-Card-Errors---Just-a-bad-card--tp28783891p28785162.html Sent from the Gumstix mailing list archive at Nabble.com. |