From: Steve P. <sp...@ny...> - 2010-03-15 17:12:23
|
Can someone kindly point me to some technical (interface) information on the Overo analog inputs? The online reference that I'm looking at is here ... http://www.gumstix.net/Hardware/view/I/O-connectors-cabling/Gumstix-Overo-70-pin-connector-J1-features-the-LCD-PWM-and-analog-signals/112.html <http://www.gumstix.net/Hardware/view/I/O-connectors-cabling/Gumstix-Overo-70-pin-connector-J1-features-the-LCD-PWM-and-analog-signals/112.html>... and the signals are referenced as ADCIN2 thru ADCIN7. The Gumstix.net support page for connector J1 definitions indicates that 'all' of the signals are direct-connected to the OMAP, yet in all of the OMAP documentation that I'm scouring through, I cannot find *any* references to analog inputs (or GPIO ADC's), etc. TI initially indicates that the OMAP3530 does not support analog inputs. Also, the support Wiki at Gumstix.net is also void of any analog input references. Thanks for any assistance. Steve NY |