From: Yuri R. <yu...@re...> - 2009-07-13 06:22:34
|
Yuri Roibu wrote: > > Hello everybody im new to this i have a board UCB1400,and i want to be > able to read Status of battery > > i was following this example: > > http://www.nabble.com/patch-for-audiostix-UCB1400-ADC-access-via--proc-td15984339.html > http://www.nabble.com/patch-for-audiostix-UCB1400-ADC-access-via--proc-td15984339.html > > and i am using "gumstix-kernel-2.6.21" > > what i've done is : > > i have aded the patch to the kernel patches(replaced it with an old one) > > bitbake -c clean gumstix-kernel > > bitbake -c rebuild gumstix-kernel > > and i wrote the new u-image to the gumstix but still in /proc i dont have > a "adc" folder like it was supposed to be, i have only /proc/gpio folder > and inside many files including UCB1400-0-0 and so on till UCB1400-0-9 > > after i have tried to change dirr in the patch from /proc/gpio to > proc/ucb1400_gpio > > and again > > bitbake -c clean gumstix-kernel > > bitbake -c rebuild gumstix-kernel > > when i wrote a new u-boot image i found out that even ucb1400_gpio is not > there > > p.s. patch in the right directory im sure but is not changing nothing on > the gumstix > building goes without any errors > > do anybody has any ideas why? > PLZ im Really stuck... > > i have tried tried to mannually play with the patch but no result can anybody suggest smth or help? -- View this message in context: http://www.nabble.com/UCB1400-how-to-add-ADC-0%2CADC1-...-tp24424120p24456737.html Sent from the Gumstix mailing list archive at Nabble.com. |