From: George Z. <gza...@ya...> - 2009-07-03 16:43:27
|
Nice to hear that. Thank you Chris! ________________________________ From: Chris Dollar <chr...@gm...> To: General mailing list for gumstix users. <gum...@li...> Sent: Friday, July 3, 2009 7:38:07 PM Subject: Re: [Gumstix-users] Overo Fire bluetooth not working /proc/gpio is for the PXA2xx based gumstix boards (like the connex, basix, and verdex), not for the overo (omap3 based). Nothing to worry about :) Chris On Fri, Jul 3, 2009 at 10:26 AM, George Zapantes<gza...@ya...> wrote: > Thanks Thad. > > Frankly, I saw that post. I though I do another post and see if anything new > was up. The thing that worried me is that there is no /proc/gpio in the > image I built, neither on the ready images and I was thinking whether this > is related to the bluetooth issue. Does anyone know whether there should be > a /proc/gpio? I do not have the proc_gpio module either to load. > > I will be getting 5-6 more, so I will be able to see if indeed it is a bad > board. At the moment I am waiting because there is no stock. > > Best regards > GZ > > > ________________________________ > From: Thad Thompson <TThompson@Nucsafe.com> > To: General mailing list for gumstix users. > <gum...@li...> > Sent: Friday, July 3, 2009 7:12:33 PM > Subject: Re: [Gumstix-users] Overo Fire bluetooth not working > > Hey George, > > If you check the mailing list archives you’ll find this is an issue a few of > us have been dealing with, but it seems to only happen on a few boards. At > this point in time I think the only solution is to RMA the board and try > again. > > > > -Thad > > > > From: George Zapantes [mailto:gza...@ya...] > Sent: Friday, July 03, 2009 11:55 AM > To: Gumstix users > Subject: [Gumstix-users] Overo Fire bluetooth not working > > > > > > Hi. > > I have an overo Fire on a Summit expansion board. > > Bluetooth fails with the following message: > > Starting Bluetooth subsystem: > Initialization timed out. > > This happened with the image the module came with. I tried building an > image, as well as using latest images but the same happened with all of > them. > > In the users WiKi How-To: Bluettoth it mentions GPIOs. I noticed that there > is no /proc/gpio. I am not sure whether this has to do with the bluetooth > failure or if it is another problem. > > Any help is welcomed! > > Thank you > George Zapantes > > > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > ------------------------------------------------------------------------------ _______________________________________________ gumstix-users mailing list gum...@li... https://lists.sourceforge.net/lists/listinfo/gumstix-users |